Detail 01
Polyphonic step sequencer: up to 64 steps, up to 6 notes per step
Supports chordal or multi-note sequence programming rather than one-note-only patterns.
Product detailSKU #1500000145799
SequentialProphet Rev2 Synthesizer Module 16 Voice
modernelectronicpop
1/5
Independent shopping perspective
The Korena take
Built for hands-on Prophet Rev2 sound design in a desktop format, this 16-voice module combines two DCOs per voice, a sub-octave generator, and resonant Curtis filtering. Waveshape modulation can be assigned manually or driven by an LFO or another modulation source, giving evolving motion to the oscillator shapes. Its effects, eight-slot modulation matrix, and layered sequencing make it well suited to building detailed parts and recalling contrasting treatments across split or stacked layers.
Strong match
Who this is for
- Creating externally clocked polyphonic sequences with up to 64 steps and six notes per step
- Building layered parts with separate effects and sequences assigned to stacked or split voices
- Shaping moving oscillator textures through manually set or modulated waveshape width
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Eight modulation-matrix slots
Provides eight individual assignment locations for routing modulation sources to destinations.
Detail 03
Main and Output B stereo outputs: 1/4-inch unbalanced
Provides separate stereo output pairs for routing audio.
Detail 04
Pedal/CV input: 0–5 VDC
Accepts an expression pedal or compatible control-voltage signal within that range.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can its sequencer follow an external MIDI clock?
Yes. Both the polyphonic step sequencer and arpeggiator can synchronize to an external MIDI clock.
02Can stacked or split layers use different effects?
Yes. A different effect can be applied to each layer in stacked or split voice mode.
03How many notes can one sequencer step hold?
Up to six notes per step.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
6 detailsConnections & power
- Main Stereo Audio Output
- 1/4 in. unbalanced
- Power Consumption
- 22 watts maximum (17 watts for 8-voice configuration; 22 watts for 16-voice configuration)
- Pedal Cv Input
- responds to expression pedals or control voltages ranging from 0 to 5 VDC (protected against higher or negative voltages)
- Headphone Output
- 1/4 in. stereo phone jack
- Sustain Pedal Input
- accepts normally on or normally off momentary footswitch
- Output B Stereo Audio Output
- 1/4 in. unbalanced
2 detailsSize & weight
- Weight
- 20.5
- Dimensions
- 12.70 x 35.12 x 3.80 in.
4 detailsOther
- 3 Envelope Generators
- filter, VCA, and assignable (four-stage ADSR + delay)
- Selectable Note Value
- 16th note, 8th note triplet, 8th note, dotted 8th note, quarter note
- 5 Additional Dedicated Sources
- mod wheel, pressure, velocity, breath controller, footswitch
- Glide
- separate rates per oscillator
