Korena by Guitar Center
Product detailSKU #1274319728022

RoyerR-122V Matched Ribbon Microphone Pair Nickel

Royer
Royer R-122V Matched Ribbon Microphone Pair Nickel
1/8

Product overview

About this model

The Matched R-122V Tube Ribbon Microphone Pair from Royer offers unsurpassed warm, realistic stereo imaging. The R-122V takes the Royer-pioneered concept of active ribbon microphone technology to an unprecedented level by incorporating vacuum tube electronics into the same proven transducer system used in the venerable R-121 and R-122 ribbon microphones. The high operating voltage of the vacuum tube provides a headroom capability far beyond that capable from a standard phantom power supply. In real-world use, this translates into unmatched clarity, detail and airiness. The Electronics The R-122V's head amplifier consists of a low-noise, triode-connected military grade 5840 vacuum tube. Designed for a wide range of applications, the Royer R-122V offers superb transient response and the drive capabilities only a vacuum tube head amplifier can provide. The circuit is devoid of typical vacuum tube coloration. The R-122V's triode-configured cathode follower circuitry enables the microphone to drive long cable runs without sonic degradation or high-frequency loss. This capability is further enhanced by the R-122V ribbon mic's dedicated power supply that provides ample current to the vacuum tube electronics. Induced noise is virtually eliminated by the microphone's fully balanced output that is electrically isolated with a special purpose Jensen output transformer. Like our phantom powered R-122, the R-122V has far more level than non-powered ribbon microphones and its impedance matching circuitry places a perfect load on the ribbon element at all times. This allows the use of a wide variety of mic preamps without concern for gain and impedance matches, two critical issues with ribbon microphones. All of the Royer R-122V's increased output comes from its large, specially designed toroidal transformer, so there is no additional noise associated with the microphone's higher output. Like all Royer products, the R-122V ribbon microphone comes with a lifetime warranty to the original owner (the tube warranty is 10 years).

Royer R-122V Matched Ribbon Microphone Pair Nickel alternate view

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsBody & build
Color
Gray
Color Finish
Dull Satin Nickel/Matte Black Chrome optional
18 detailsOther
Category Source
detail
Vacuum Tube
JAN mil-spec 5840W pentode wired in triode
Maximum SPL
>135dB SPL @ 20 Hz
Generating Element
2.5-micron aluminum ribbon
Self-Noise
Output Impedance: 200 Ohms, balanced
Korena Special
false
Magnets
Rare Earth Neodymium
Dimensions (WxHxD)
1" (2.5 cm) x 8.13" (20.6 cm)
Weight
0.68 lbs (0.30 kg)
Sensitivity
-36 dB (re. 1v/pa +/- 1 dB)
Rated Load Impedance
1 K-Ohm
Power Requirements
Plate supply: 135 VDC @2ma, Filament supply: 6 VDC@ 150ma from dedicated power supply.
Tier
new
Polar Pattern
Figure-8
Acoustic Operating Principle
Electrodynamic pressure gradient with vacuum tube electronics.
Source Id
site51274319728022
Frequency Response
30 -15,000 Hz +/- 3dB
Finish
Dull Satin Nickel/Matte Black Chrome optional

Complete your setup

Worth comparing

More from Royer