Korena
Product detailSKU #1500000450587

RODEWireless GO (3rd Gen)

RODE logo
RODE Wireless GO (3rd Gen)
1/13

Independent shopping perspective

The Korena take

RØDE’s Wireless GO (3rd Gen) is a compact dual-channel wireless microphone system for recording two sources while keeping a backup on each transmitter. Series IV 2.4GHz digital transmission with 128-bit encryption reaches up to 260 m line of sight. GainAssist manages recording levels, and 32-bit float onboard recording lets clipped or quiet files be recovered in editing. Built-in omnidirectional microphones, locking 3.5 mm connections and receiver monitoring support a controlled capture workflow.

RODE Wireless GO (3rd Gen) product detail
Product studyRODE Wireless GO (3rd Gen)
RODE Wireless GO (3rd Gen) alternate view
Alternate view

Strong match

Who this is for

  • Two-source content recording with onboard backup files on both transmitters.
  • Camera, smartphone or computer setups requiring wireless capture and receiver headphone monitoring.
  • Recording sessions where gain adjustment and recovery of difficult recording levels matter.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

RODE Wireless GO (3rd Gen) construction detail

Detail 01

32GB internal memory per transmitter

Each transmitter holds more than 40 hours of backup recording time.

Detail 02

Up to 7 hours operating time

The rechargeable internal battery is rated for up to seven hours of use.

Detail 03

3.5 mm TRRS receiver output

The receiver supports headphone monitoring or an external audio input through its TRRS jack.

Detail 04

3.5 mm locking TRS transmitter input

The transmitter uses a locking connection for an attached audio source.

Detail 05

20 Hz–20 kHz frequency range

This is the system's specified frequency range.

Final check

Know before you order

  1. 01Transmitters and receiver use built-in rechargeable lithium-ion batteries charged through USB-C.
  2. 02The quoted 260 m transmission range is specified for line-of-sight operation.
RODE Wireless GO (3rd Gen) close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can it record a backup without the receiver?

Yes. Each transmitter has 32GB of internal memory and supports 32-bit float onboard recording.

02Can I monitor from the receiver?

Yes. Its 3.5 mm TRRS jack supports headphone monitoring or an external audio input.

03How long does the system run?

Operating time is rated at up to seven hours.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsSound
Polar Pattern
Omnidirectional
Frequency Range
20Hz–20kHz
3 detailsConnections & power
Analog Outputs
3.5mm TRRS (RX)
Power Requirements
In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Analog Inputs
3.5mm locking TRS (TX)
1 detailsSize & weight
Equivalent Noise A Weighted
22dBA
8 detailsOther
Transmission Range
260m (line of sight)
Tx
1.83 x 1.73 x 0.79” (46.5 x 44 x 20 mm)
Rx
1.83 x 1.73 x 0.79” (46.5 x 44 x 20 mm)
Signal to Noise Ratio
72dB
Acoustic Principle
Pre-polarized pressure transducer
Maximum SPL
123.5dBSPL
Operating Time
Up to 7 hours
Digital Connectivity
USB-C

Complete your setup

Worth comparing

More from RODE