Korena
Product detailSKU #1274115056241

RODEPodcaster USB Broadcast Microphone

RODE logo
RODE Podcaster USB Broadcast Microphone
1/3

Independent shopping perspective

The Korena take

USB dynamic broadcast mic with onboard conversion and headphone monitoring. For podcasters who want one cable to the computer and no interface.

RODE Podcaster USB Broadcast Microphone product detail
Product studyRODE Podcaster USB Broadcast Microphone
RODE Podcaster USB Broadcast Microphone alternate view
Alternate view

Strong match

Who this is for

  • Podcasting straight into a laptop with no interface
  • Voiceover and narration in an untreated room
  • Remote interviews where you need zero-latency headphone monitoring

Consider the trade-offs

When to look elsewhere

  • Multi-mic setups — USB mics don't gang together easily
  • Recording music or instruments needing detail above 14kHz
  • Anyone wanting to route through an existing mixer or XLR chain

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

USB output, no XLR

Plugs straight into a computer and bypasses an interface entirely. It also can't be used with a mixer or preamp.

Detail 02

Dynamic capsule

Ignores room reflections and background noise much better than a USB condenser. Forgiving in a room with no treatment.

Detail 03

18-bit resolution

Below the 24-bit standard of modern interfaces. Fine for speech; set levels carefully as there's less headroom to spare.

Detail 04

40Hz–14kHz frequency range

Extends low for voice weight but cuts off at 14kHz. Speech sounds full; cymbals and acoustic detail get lost.

Detail 05

USB bus powered

No power supply or phantom power needed. One cable carries both power and audio.

Detail 06

655g weight

Heavy for a desk mic. A cheap scissor arm will sag; use one rated for a broadcast mic.

Final check

Know before you order

  1. 01Only records one mic per computer input — not a two-host desk solution
  2. 02Needs a stand or arm rated for 655g; it won't sit on a small tripod
  3. 03Check the included cable's USB connector matches your computer's ports

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Do I need an audio interface with this?

No. Conversion and the USB interface are built in, so it connects directly to a computer. That's the whole point of this model over the XLR versions.

02Can I use two of these for a two-person podcast?

Not easily. Computers generally handle one USB audio input at a time. For two hosts, XLR mics into a single interface is the cleaner route.

03Is there a headphone jack for monitoring?

Yes, there's a headphone output on the mic for monitoring your own voice without the round-trip delay of listening through software.

04How close should I speak to it?

It's an end-address cardioid, so talk into the top of the mic from a few inches away. Closer gives more low-end weight; off-axis reduces plosives.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Polar Pattern
Cardioid
Frequency Range
40Hz–14kHz
Sensitivity
-51.0 dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
1 detailsPickups & controls
Active Electronics
Analog signal conditioning + A/D and USB interface
1 detailsBody & build
Color
White
2 detailsConnections & power
Output
USB Output
Power Options
USB bus powered
2 detailsSize & weight
Weight
655
Dimensions Hxwxd
215 mm x 56 mm x 52 mm
6 detailsOther
Address Type
End
Acoustic Principle
Dynamic
Resolution
18-bit
Maximum SPL
115 dBSPL
Sampling Rate
44–96kHz
Warranty
1 year with free extension to 10 years following registration here

Complete your setup

Worth comparing

More from RODE