Korena by Guitar Center
Product detailSKU #1500000440400

RODENT1 Signature Series White

RODE logo
RODE NT1 Signature Series White
1/8

Independent shopping perspective

The Korena take

Finished in white, the NT1 Signature Series is a side-address condenser microphone with a 1-inch capsule and cardioid pickup pattern. Its 4dBA equivalent-noise specification keeps self-noise low, while the stated 142dB SPL maximum accommodates louder sources. The cardioid pattern focuses capture from the front and reduces off-axis pickup. A shockmount, pop filter, and XLR cable come with the microphone, giving vocal, acoustic-instrument, voiceover, podcast, and video-recording setups the core pieces named for this model.

RODE NT1 Signature Series White product detail
Product studyRODE NT1 Signature Series White
RODE NT1 Signature Series White alternate view
Alternate view

Strong match

Who this is for

  • Recording vocals, acoustic instruments, or voiceovers with front-focused cardioid capture.
  • Starting a home recording setup with the included shockmount, pop filter, and XLR cable.
  • Capturing louder sources within the stated 142dB SPL maximum.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

RODE NT1 Signature Series White construction detail

Detail 01

Cardioid polar pattern

Focuses on sound in front of the microphone and reduces off-axis pickup.

Detail 02

4dBA equivalent noise

The microphone has a stated 4dBA equivalent-noise figure.

Detail 03

142dB SPL maximum

Its maximum SPL is specified at 142dB.

Detail 04

20Hz–20kHz frequency range

Covers the stated 20Hz to 20kHz range.

Final check

Know before you order

  1. 01The analogue power requirement is P48.
  2. 02The microphone connects through a 3-pin XLR output.
RODE NT1 Signature Series White close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What accessories come with the NT1 Signature Series?

It includes a shockmount, pop filter, and XLR cable.

02What pickup pattern does it use?

It uses a cardioid polar pattern, focusing on sound in front of the microphone while reducing off-axis pickup.

03What color is this version?

This NT1 Signature Series version is white.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
White
20 detailsOther
Address Type
Side
Analogue Output Connection
3-pin XLR
Category Source
detail
Frequency Range
20Hz–20kHz
Analogue Power Requirements
P48
Maximum SPL
142dB SPL
Capsule
1.00”
Korena Special
false
Equivalent Noise (A-Weighted)
4dBA
Weight
11 oz
Active Electronics
JFET impedance converter with bipolar output buffer
Acoustic Principle
Pressure gradient
Sensitivity
-32dB re 1 Volt/Pascal (25 mV @ 94dB SPL) +/- 2dB @ 1kHz
Tier
new
Length
2”
Polar Pattern
Cardioid
Output Impedance
100 ohm
Height
7.4”
Source Id
site51500000440400
Width
2”

Complete your setup

Worth comparing

More from RODE