Detail 01
Pinstripe construction
Two plies bonded at the edge with a damping ring between them. Kills high overtones and shortens sustain.

Independent shopping perspective
A 12-inch coated tom head with built-in overtone control. For drummers who want a fatter, shorter note without taping the head.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Two plies bonded at the edge with a damping ring between them. Kills high overtones and shortens sustain.
Detail 02
Textured surface softens the attack and gives brushes something to grab. Darker than a clear head of the same build.
Detail 03
More mass means lower pitch and longer head life, but it takes more tension to open the drum up.
Detail 04
Refers to the shell diameter, not the old head or the hoop. Measure edge to edge before ordering.
Detail 05
Goes on the top, hitting side of a rack tom. Not thin enough to work as a resonant bottom head.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes. Drum head sizing is standard. Measure the shell itself across the top, not the rim or the old head, and it will seat on any 12-inch tom.
Slightly. The coating takes some high end off the attack. Both control ring the same way, but coated sounds warmer and drier.
Usually not. The damping is built into the head. Add tape only if the shell still rings after you tune it.
Yes. The coating gives brushes texture to catch, which a clear head does not.