Detail 01
XLR male to XLR female
The two ends use different XLR connector genders.
Product detailSKU #1336752541746
ProCoSMM-1 StageMASTER XLR Microphone Cable - 30 ft.
Sale
1/3
Independent shopping perspective
The Korena take
A 30 ft Lo-Z balanced microphone cable with XLR male and XLR female ends, using shielded twisted-pair construction.
Strong match
Who this is for
- 30 ft microphone-cable runs
- Connections requiring XLR male-to-female cable ends
Consider the trade-offs
When to look elsewhere
- Runs longer than 30 ft
- Connections that do not use XLR male and female ends
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Lo-Z balanced
It is specified as a Lo-Z balanced microphone cable.
Detail 03
Two-conductor shielded twisted pair
The cable has two conductors in a shielded twisted-pair construction.
Detail 04
90% shield coverage
Shield coverage is specified at 90%.
Final check
Know before you order
- 01Confirm the connection needs an XLR male end and an XLR female end.
- 02Measure for a 30 ft run.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What are the cable ends?
One XLR male end and one XLR female end.
02How long is it?
30 ft.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Calculated Impedance
- 70 ohm/kft., 230 ohm/km
4 detailsBody & build
- Color
- Black
- Insulation Material
- Polypropylene
- Conductor Material
- Bare Annealed Copper
- Shield Material
- Bare Annelsed Copper Serve
3 detailsConnections & power
- Jacket Material
- Polyvinyl Chloride
- Jacket Color
- Matte Black
- Jacket Wall Thickness
- .055 inch, 1.40 mm
3 detailsSize & weight
- Outer Diameter
- .230 ±.005 inch, 5.84 ±1.27 mm
- Insulation Diameter
- .050 ±.002 inch mm, 1.27 ±051 mm
- Nominal Lay Length Pair
- 1.75 inch left hand, 44.5 mm
10 detailsOther
- Conductor Gauge
- 24 AWG, 20 mm2
- Stranding No Strands X Awg
- 7 x 32, 7 x .254 mm
- Shield Coverage
- 90%
- Between One of Paired Conductors and Remaining Conductor Tied to Shield
- 37 pf/ft., 121 pf/m
- Velocity of Propagation
- 66%
- Nominal Conductor Resistance 20 C
- 24 ohm/kft., 79 ohm/km
- Insulation
- .013 inch, .330 mm
- Between Paired Conductors
- 21 pf/ft., 69 pf/m
- Wire
- CS-MIC.K 2-conductor, shielded
- Filler
- Jute as required
