Detail 01
24 AWG conductors
Uses 24 AWG bare annealed copper conductors.
Product detailSKU #1336752541830
ProCoSMM-1 StageMASTER XLR Microphone Cable - 3 ft.
1/3
Independent shopping perspective
The Korena take
A 3 ft balanced XLR microphone cable with shielded twisted-pair wiring for short microphone connections.
Strong match
Who this is for
- Connecting a microphone over a short run
- Budget-minded XLR microphone setups
Consider the trade-offs
When to look elsewhere
- Runs longer than 3 ft
- Connections that do not use XLR male and female ends
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
90% shield coverage
The cable uses a bare copper serve shield with 90% coverage.
Detail 03
XLR male to XLR female
Made for XLR microphone connections.
Final check
Know before you order
- 01Confirm that 3 ft is enough for your setup.
- 02Check that both connection points use XLR.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long is this cable?
It is 3 ft long.
02What connectors does it use?
It has an XLR male connector on one end and an XLR female connector on the other.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Calculated Impedance
- 70 ohm/kft., 230 ohm/km
4 detailsBody & build
- Color
- Black
- Insulation Material
- Polypropylene
- Conductor Material
- Bare Annealed Copper
- Shield Material
- Bare Annelsed Copper Serve
3 detailsConnections & power
- Jacket Material
- Polyvinyl Chloride
- Jacket Color
- Matte Black
- Jacket Wall Thickness
- .055 inch, 1.40 mm
3 detailsSize & weight
- Outer Diameter
- .230 ±.005 inch, 5.84 ±1.27 mm
- Insulation Diameter
- .050 ±.002 inch mm, 1.27 ±051 mm
- Nominal Lay Length Pair
- 1.75 inch left hand, 44.5 mm
10 detailsOther
- Conductor Gauge
- 24 AWG, 20 mm2
- Stranding No Strands X Awg
- 7 x 32, 7 x .254 mm
- Shield Coverage
- 90%
- Between One of Paired Conductors and Remaining Conductor Tied to Shield
- 37 pf/ft., 121 pf/m
- Velocity of Propagation
- 66%
- Nominal Conductor Resistance 20 C
- 24 ohm/kft., 79 ohm/km
- Insulation
- .013 inch, .330 mm
- Between Paired Conductors
- 21 pf/ft., 69 pf/m
- Wire
- CS-MIC.K 2-conductor, shielded
- Filler
- Jute as required
