Detail 01
8 inches deep
Depth is what buys low-frequency absorption. Thin 2-inch panels only tame highs; this reaches meaningfully into bass.

Independent shopping perspective
A 2x4-foot, 8-inch-deep broadband absorber and bass trap in black, for treating a room's low end as well as its reflections.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Depth is what buys low-frequency absorption. Thin 2-inch panels only tame highs; this reaches meaningfully into bass.
Detail 02
Eight square feet of coverage per panel, so a corner or first-reflection point is handled by one unit.
Detail 03
Absorbs across highs, mids and lows rather than only killing treble and leaving the room dull and boomy.
Detail 04
Disappears against dark walls and under camera lighting; shows dust and light-colored debris more than lighter fabrics.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. This absorbs sound inside the room to control reflections and bass buildup. Blocking sound between rooms requires mass and structural isolation, which no acoustic panel provides.
Corners first, where low frequencies pile up, then first reflection points on side walls. An 8-inch trap earns its depth most in corners.
Depth. Two-inch foam absorbs highs and leaves the low end untouched, which makes a room sound dead but still boomy. Eight inches works lower.
Depends on room size and problem. Most small rooms start with corner traps, then add panels at side-wall and ceiling reflection points as needed.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.