Detail 01
6 lb per cubic foot density
Dense enough to absorb well into the low-mids, not just tame hiss and sibilance like light foam does.

Independent shopping perspective
A 2-inch-thick, 24x48 broadband absorber in an aluminum frame, built to hang overhead. For treating first reflections off a ceiling in a mix room or live room.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Dense enough to absorb well into the low-mids, not just tame hiss and sibilance like light foam does.
Detail 02
Broadband down through the midrange. Thicker panels or corner traps still do the low-frequency work.
Detail 03
One panel covers a typical reflection zone above a desk. Two or three cover a full listening position.
Detail 04
Holds the panel flat and rigid when suspended, so it will not sag or bow over the years.
Detail 05
Holds its shape and does not crumble or off-gas the way soft foam degrades over time.
Detail 06
The fabric is there to look finished and contain the core; it does not reflect the high end back at you.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. At 2 inches it works broadband down through the midrange. Low-end problems need thicker traps in the corners, used alongside this.
Start with one directly above the listening position, centered between you and the speakers. Add a second or third to widen coverage.
Yes, though a small air gap behind the panel improves absorption at lower frequencies. Hanging it slightly off the surface is worth the effort.
The polyester fabric facing is gray. It wraps the glass fiber core inside the aluminum frame.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.