Detail 01
Universal mount
Clamps to standard mic stands and boom arms rather than a proprietary mount, so it works with mics from any brand.
Product detailSKU #1274115046147
MXLPF-001 Universal Gooseneck Microphone Pop Filter Black
Independent shopping perspective
The Korena take
Gooseneck pop filter that clamps to a mic stand. Cuts plosives on vocal recording. Fits any standard stand, not tied to MXL mics.
Strong match
Who this is for
- Home vocal tracking where p and b sounds spike the input
- Podcast and voiceover work on a condenser
- Any stand-mounted mic that lacks built-in plosive protection
Consider the trade-offs
When to look elsewhere
- Recording instruments or amps, where plosives are not an issue
- Handheld or boom-arm setups with no clamp point
- Anyone needing a foam windscreen for outdoor wind
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Gooseneck
Bends and holds position, so you set the gap between filter and capsule once and it stays there.
Detail 03
Pop filter screen
Diffuses the blast of air from p, b and t sounds before it hits the capsule, without much effect on the tone.
Detail 04
Clamp attachment
Mounts to the stand, not the mic, so the mic's own shock isolation stays intact.
Final check
Know before you order
- 01Filter only — no mic, no stand, no shock mount
- 02You need a stand or boom with a clampable shaft
- 03Set it roughly a fist's width from the capsule
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this only work with MXL microphones?
No. It clamps to the stand rather than the mic, so it works with condensers and dynamics from any brand.
02How far from the mic should it sit?
Roughly a fist's width, about four inches. Too close and plosives still get through, too far and you drift off-axis when you move.
03Will it fit my boom arm?
The clamp is sized for standard mic stand and boom arm shafts. Very thick or oddly shaped arms may not fit.
04Does a pop filter change the sound?
Minimally. It stops low-frequency air blasts from plosives. Any effect on the high end is slight compared with the plosive it prevents.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
