Detail 01
TT (bantam) plugs on both ends
Fits bantam patchbays only. Smaller than 1/4-inch TRS, so it packs more points into the same rack width.
Product detailSKU #1316705828903
MogamiPure Patch TT-TT Patch Cable Red 12 in.
Independent shopping perspective
The Korena take
A 12-inch TT (bantam) patch cable from Mogami, for wiring short hops between adjacent points on a bantam patchbay.
Strong match
Who this is for
- Normalling short runs between two nearby patchbay points
- Studios standardizing on TT/bantam I/O instead of 1/4-inch
- Tight racks where longer cables would bundle and sag
Consider the trade-offs
When to look elsewhere
- Anyone with 1/4-inch TRS patchbays — the plugs won't fit
- Reaching across a rack; 12 inches spans only neighbors
- Guitar and instrument use — this is a patchbay format
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
12 inches long
Reaches a few jacks left or right on the same bay. Won't cross to another row or another rack unit.
Detail 03
TT is a three-conductor plug
Carries balanced mono or a tip/ring pair, which is why it works on line-level studio patchbays.
Detail 04
Red jacket
Color is purely for identification — reserve red for a signal group you want to spot at a glance.
Detail 05
$34.99 for one cable
Wiring a full 48-point bay means buying many of these, so budget per-point, not per-cable.
Final check
Know before you order
- 01One cable only — no patchbay, no bulk pack, no adapters included
- 02Confirm your bay is TT/bantam, not 1/4-inch, before ordering
- 03Buy several lengths; a bay wired in one length gets messy fast
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this work with my 1/4-inch patchbay?
No. TT (bantam) plugs are physically smaller and won't seat in a 1/4-inch jack. You'd need TT-to-1/4-inch cables instead.
02Is 12 inches long enough?
Only for jacks close together on the same bay. For crossing rows or reaching a second bay, step up to 18 or 36 inches.
03Is this balanced?
The TT plug is a three-conductor tip/ring/sleeve connector, so it passes balanced line-level signal between patchbay points.
04Does the red color mean anything?
Nothing electrical. Use it to color-code sections of your bay — sends, returns, mults — so you can trace a patch visually.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Red
