Detail 01
Quad conductor (Neglex Quad)
Four conductors instead of two, wired in opposing pairs. Cancels magnetic hum better than standard two-conductor mic cable.
Product detailSKU #1275776902249
MogamiGold Studio Neglex Quad Mic Cable With Neutrik XLR Connectors - 15 ft.
Independent shopping perspective
The Korena take
A 15-foot balanced XLR mic cable with Neutrik connectors and quad-star conductor layout. For studio and stage runs where noise pickup is a problem.
Strong match
Who this is for
- Mic runs near light dimmers, power amps, or other noise sources
- Permanent studio wiring you don't want to revisit
- Stage use where connectors get stepped on and pulled
Consider the trade-offs
When to look elsewhere
- Guitar or line-level 1/4 inch connections
- Anyone who just needs a spare cable in the gig bag
- Short patch runs inside a rack
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Balanced XLR
Sends the signal twice, out of phase. The input flips one back and cancels whatever noise both picked up along the way.
Detail 03
Neutrik connectors
The industry standard shell and latch. Positive click on the male pin, and the strain relief holds up to repeated coiling.
Detail 04
15 feet
Reaches from a vocal mic to a nearby interface or from a stage box to a mic stand without a big coil on the floor.
Detail 05
XLR female to XLR male
Female into the mic, male into the preamp or console. Runs mic level or line level equally well.
Final check
Know before you order
- 01No 1/4 inch adapters included — this is XLR on both ends
- 02Won't power a mic on its own; phantom comes from your preamp
- 03Quad construction makes it stiffer than standard mic cable
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this carry phantom power?
Yes. Balanced XLR cable passes 48V phantom from your preamp or interface to a condenser mic. The cable itself doesn't generate it.
02What does quad actually do?
It uses four conductors in opposing pairs so magnetic interference hits both pairs equally and cancels out. The difference shows up near dimmers, transformers, and power runs.
03Can I use this for my guitar?
No. Guitars use unbalanced 1/4 inch jacks. You'd need a different cable, or a DI box to convert the guitar signal to balanced XLR.
04Will this work with my audio interface?
Yes, if the interface has XLR mic inputs. That covers nearly every interface with a preamp, including combo jacks that take both XLR and 1/4 inch.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
