Detail 01
SoundCheck DSP with Flat, DJ, Live, and Wedge modes
Choose a voicing mode for playback, live reinforcement, or wedge monitoring.
Product detailSKU #1500000479356
MackieThump15v4 15" Powered Loudspeaker
1/5
Independent shopping perspective
The Korena take
Thump15v4 is a powered 15-inch loudspeaker for live sound, DJ playback, and stage-monitor use. A 1400W Class-D amplifier drives its 15-inch woofer and 1-inch compression driver, with a 130dB peak SPL rating and response down to 34Hz at -10dB. SoundCheck DSP provides Flat, DJ, Live, and Wedge modes, alongside Feedback Eliminator, Music Ducking, and Outdoor Mode. The onboard mixer and Bluetooth handling cover direct sources, streaming, wireless speaker linking, and app-based control in one cabinet.
Strong match
Who this is for
- Live sound or DJ playback requiring a 15-inch woofer and 130dB peak output.
- Using microphones, instruments, and playback devices through the integrated mixer.
- Floor-monitor, pole-mounted, or M10 fly-point loudspeaker placement.
Consider the trade-offs
When to look elsewhere
- Installations requiring a response below the rated 34Hz–20kHz range at -10dB.
- Users needing more than the speaker’s two XLR/TRS combo inputs plus auxiliary and Bluetooth inputs.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 XLR/TRS combo inputs, 1/8-inch TRS input, Bluetooth, and XLR mix output
Accommodates several direct sources and can feed a further speaker or system.
Detail 03
Bluetooth 5.0 streaming and control
Streams audio, supports wireless speaker linking, and works with the Thump Connect 2 app.
Detail 04
Floor, pole, or M10 fly mounting; 40-degree monitor angle
The cabinet can be placed or mounted in several configurations.
Detail 05
Peak/RMS limiting and thermal protection
Includes limiting and thermal-protection circuitry.
Final check
Know before you order
- 01The cabinet weighs 32.6.
- 02Power input is 100–240V AC, 50/60Hz through an IEC 3-pin connector.
- 03A power cable and quick-start guide are included.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the Thump15v4 work as a stage wedge?
Yes. It has a 40-degree monitor angle and a Wedge voicing mode.
02Can I stream audio from a device?
Yes. Bluetooth 5.0 supports audio streaming and control.
03Does it have an output for another speaker?
Yes. It has one XLR mix output.
04What is the maximum SPL?
130dB peak.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSound
- Frequency Response 3db
- 41Hz–20kHz
- Crossover Frequency
- 1.8kHz
- High Frequency Driver
- 1 inch compression driver
- Low Frequency Driver
- 15 inch woofer (ferrite)
- Frequency Response 10db
- 34Hz–20kHz
10 detailsConnections & power
- Inputs
- 2 × XLR/TRS combo, 1 × 1/8 inch TRS, Bluetooth
- Peak Power
- 1400W
- Output
- 1 × XLR mix out
- Input Voltage
- 100–240V AC, 50/60Hz
- Input Impedance
- 10 kohm
- Output Impedance
- 150 ohm
- Power Consumption
- 350W
- Power Connector
- IEC 3-pin
- Hf Power
- 200W
- Lf Power
- 1200W
2 detailsSize & weight
- Weight
- 32.6
- Dimensions
- 27.4 inch × 17.3 inch × 14.0 inch
1 detailsIn the box
- Included Accessories
- power cable, quick start guide
12 detailsOther
- DSP
- SoundCheck DSP
- Voicing Modes
- Flat, DJ, Live, Wedge
- Protection
- Peak/RMS limiting, thermal protection
- Model
- Thump15v4
- Amplifier Type
- Class-D
- Coverage
- 140° × 60°
- Monitor Angle
- 40°
- Maximum SPL
- 130dB peak
- Product Type
- Powered loudspeaker
- Bluetooth
- Version 5.0 (audio streaming and control)
- Mounting
- Floor, pole mount, or fly (M10 points)
- Cooling
- Convection
