Detail 01
Passive, 8 ohms
Needs an external power amp. Two per channel at 8 ohms each usually gives a 4-ohm load — check your amp handles it.

Independent shopping perspective
12-inch passive PA cabinet rated 150 watts continuous, with an 8-ohm load and NL4 or 1/4-inch input. For mid-size rooms where you already own an amp.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Needs an external power amp. Two per channel at 8 ohms each usually gives a 4-ohm load — check your amp handles it.
Detail 02
Loud per watt. A modest amp gets useful volume; you are not required to chase big wattage numbers.
Detail 03
Real low end down to low bass guitar range. Kick drum and synth bass will want a sub underneath.
Detail 04
Steep split keeps the 12-inch woofer out of the horn's range, so vocals stay clean at high output.
Detail 05
Wide horizontally, tight vertically. Aim it at ear height — tilt matters more than left-right placement.
Detail 06
Angled sides let it lie on its side as a floor wedge. Heavy enough that pole-mounting needs a rated stand.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
No. This is passive and has no amplifier. A mixer's line output needs a power amp between it and the speaker.
It handles 150 watts continuous at 8 ohms. With 106dB sensitivity, a few hundred watts per channel gives headroom without pushing the driver hard.
Yes. The trapezoidal cabinet is built to sit on its side, and the 45-degree vertical pattern suits wedge angles.
For vocals, guitars and DJ playback at moderate levels, no. For kick drum and electronic bass, add one — response falls off below 55Hz.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.