Korena
Product detailSKU #1274034480820

JBLC29AV-1 Control 2-Way Indoor/Outdoor Speaker White

JBL logo
JBL C29AV-1 Control 2-Way Indoor/Outdoor Speaker White
1/2

Independent shopping perspective

The Korena take

Weatherproof 8-inch two-way install speaker with 70V/100V taps. For fixed background and foreground audio in patios, retail, and covered outdoor areas.

JBL C29AV-1 Control 2-Way Indoor/Outdoor Speaker White product detail
Product studyJBL C29AV-1 Control 2-Way Indoor/Outdoor Speaker White

Strong match

Who this is for

  • Restaurant patios and covered outdoor seating on a 70V line
  • Retail or gym zones needing full-range sound, not just paging
  • Multi-speaker distributed systems where wattage is set per unit

Consider the trade-offs

When to look elsewhere

  • Live bands or DJs — this is an install box, not portable PA
  • Critical studio listening; voicing is built for coverage, not flat monitoring
  • Fully exposed installs with direct rain or standing water

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

70V/100V transformer taps

Wire many speakers on one long run off a single amp. Pick 14W to 110W per unit to balance volume across zones.

Detail 02

Through position, 8 ohms

Bypasses the transformer so you can run it as a normal low-impedance speaker off a standard amp.

Detail 03

IP-X4 splashproof

Handles splashing water and weather from any angle. Rated for humidity, salt spray, and UV — not for submersion or direct downpour.

Detail 04

43Hz–15kHz response

Real low end for an install speaker. Music has body without a subwoofer, though the top octave rolls off early.

Detail 05

110H x 85V rotatable coverage

Wide horizontal pattern covers a room from fewer points. Rotate the horn 90 degrees for tall narrow spaces.

Detail 06

26.8 lb each

Heavy for a wall box. The mount and the wall structure behind it both need to carry real load.

Final check

Know before you order

  1. 01Sold as a single speaker at this price — budget per unit, not per pair
  2. 02InvisiBall mounting base included; a 70V amplifier is not
  3. 03Set the tap before final mounting — the panel is behind the input cover

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I run this off a regular stereo amp?

Yes. Set the transformer to the through position for 8 ohms nominal, then wire it like any passive speaker.

02Does it come with a mounting bracket?

Yes, the InvisiBall mounting base and a hex wrench are included, along with an input panel cover.

03Is this sold in pairs?

No, single speaker. Order the quantity your zone layout needs.

04Can it go in full sun and rain?

It exceeds Mil-Spec 810 for UV, humidity, and salt spray and is IP-X4 splashproof. Mount under an overhang rather than in direct rainfall.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

7 detailsSound
Low Frequency
8 inch (200 mm) kevlar cone with pure butyl rubber surround, 2 inch (50 mm) voice coil on fiberglass former
High Frequency
1 inch (25 mm) compression driver, pure titanium diaphragm with patented JBL diamond surround
Nominal Impedance
8 ohms
Frequency Response 3db
43Hz–15kHz
Nominal Sensitivity Half Space Average 100hz to 10khz
90dB, 1W @ 1 m (3.3')
Frequency Range 10db
37Hz–18kHz
Minimum Impedance
6.3 ohms @ 230Hz 3.3 ohms @ 4.1kHz
2 detailsBody & build
Color
White
Enclosure Material
High-impact polystyrene
1 detailsConnections & power
100 Hour Power Capacity
300-watts Continuous Program Power, 150-watts Continuous Pink Noise
2 detailsSize & weight
Net Weight Each
26.8 lb. (12.2 kg)
Dimensions Hxwxd
20.5 inch x 12 inch x 10.9 inch, (520 x 306 x 277mm)
1 detailsIn the box
Included Accessories
1-piece MTC-PC2 input panel cover, InvisiBall mounting base, 6x260 mm hex wrench
11 detailsOther
Termination
Screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers; accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm)
Nominal Coverage Angle
110H x 85V, rotatable
Crossover Type
3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5kHz crossover frequency
Maximum SPL 1m3
Short-Term: 118dB; Long-Term: 112dB
Environmental
IEC 529 IP-X4 splashproof rating; exceeds Mil-Spec 810 for humidity, salt spray, temperature & UV; Passes Mil-Std-202F for salt spray
Transformer Taps
70V: 110W, 55W, 28W & 14W; 100V: 110W, 55W, & 28W; through position: 8 ohms nominal
Directivity Index DI
8.3dB, averaged 500Hz to 16kHz
Overload Protection
Full-range power limiting to protect network and transducers; serviceable internal fuse to protect during extreme overload conditions
Directivity Factor Q
6.7, averaged 500Hz to 16kHz
Grille
Thermoset composite-coated steel
Safety Agency Rating
Transformer is listed per UL1876