Detail 01
Dual RCA, both ends
One cable handles left and right in a bonded pair. No stray single leads to track down behind a rack.

Independent shopping perspective
A 13-foot stereo RCA pair for connecting consumer or DJ gear — mixers, turntables, tape decks, powered speakers with RCA inputs.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
One cable handles left and right in a bonded pair. No stray single leads to track down behind a rack.
Detail 02
Reaches across a DJ booth or from a rack to speakers on stands. Long for RCA, which is unbalanced.
Detail 03
At this length hum and interference are possible near power cables or dimmers. Route it away from AC lines.
Detail 04
Consumer and DJ standard. Pro interfaces and mixers with 1/4" or XLR jacks need adapters.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
It's workable. RCA is unbalanced so it picks up interference more readily than balanced cable, but at this length in a normal setup it's fine if you route it away from AC.
You can use one of the two legs for a mono sub feed. The second leg just sits unused.
Yes, for the audio. Turntables also need their ground wire attached to the amp's ground post or you'll get hum, and that wire isn't part of this cable.
Not directly. You'll need RCA-to-1/4" adapters or a different cable, since the connectors don't mate.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.