Detail 01
TS connectors
Two conductors, tip and sleeve. This is the standard instrument and pedal connection, not a balanced or stereo one.

Independent shopping perspective
A short unbalanced 1/4 inch patch cable, 3 feet. For linking pedals, rack gear, or anything sitting within arm's reach on a board or desk.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Two conductors, tip and sleeve. This is the standard instrument and pedal connection, not a balanced or stereo one.
Detail 02
No noise rejection built into the wiring, so keep the run short and away from power supplies.
Detail 03
Sized for gear sitting side by side. Long enough to loop slack, short enough to stay out of the way.
Detail 04
Stick straight out of the jack, so they need clearance behind pedals placed tight against each other.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes. Unbalanced 1/4 inch TS is the standard pedal connection, and 3 feet covers most spacing on a board.
Only if you're sitting right next to the amp. Three feet gives you no room to move.
No. It's unbalanced TS. For a balanced connection you need a TRS cable and gear with balanced jacks.
No. Both ends are the same 1/4 inch TS plug, so it connects either way.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.