Detail 01
Snare side, not batter side
Cut with a gate for the snare wires to pass through. It will not work as a top hoop.

Independent shopping perspective
A 14-inch, 10-lug wood snare-side hoop. For drummers replacing a damaged bottom hoop or swapping metal for wood on a 10-lug snare.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Cut with a gate for the snare wires to pass through. It will not work as a top hoop.
Detail 02
Softens stick attack and rim sound compared to die-cast or triple-flanged steel. Slightly warmer, less ring.
Detail 03
Ten holes at 10-lug spacing. An 8-lug snare will not accept it.
Detail 04
Standard snare diameter. Confirm your drum is 14 in., not 13 or 12.
Detail 05
More even tension pull across the resonant head, but wood can dent if overtightened or dropped.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. The holes are drilled for 10-lug spacing. You need an 8-lug hoop for an 8-lug drum.
No. Snare-side hoops are cut to clear the snare wires, so the batter side needs a different hoop.
Wood damps some of the metallic ring a steel hoop adds and softens the overall response. The difference is subtle but audible on rim hits.
Not necessarily. Reuse your existing rods if they are in good shape, but check that the lengths still seat properly with the wood hoop's thickness.