Detail 01
Hinged design
Opens and clamps around the tube in place, so you don't have to strip the stand down to fit it.

Independent shopping perspective
A hinged memory lock for 12.7 mm (7/8 in.) tubing. Clamps onto a stand tube to mark a height setting so you can reset it fast.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Opens and clamps around the tube in place, so you don't have to strip the stand down to fit it.
Detail 02
Sized for one specific tube diameter. A tube even slightly off will not seat correctly.
Detail 03
Sits under the tube joint as a stop, so the section always drops to the same height.
Detail 04
One lock covers one tube joint. A full kit typically needs several.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Measure the outer diameter of the tube section the lock will sit on. 12.7 mm is a common mid-size stand tube, but sizes vary by brand and stand.
Yes. The hinge lets it open and wrap around the tube in place, then close and tighten.
It is a height stop, not a load-bearing clamp. The stand's own tube lock still does the holding.
One. Buy one per tube joint you want to mark.