Detail 01
7/8 in. size
Sized to one tube diameter. Measure the tube itself, not the outer section, since stands step down in size.
Product detailSKU #1273887992899
Gibraltar4-Pack Memory Locks 7/8 in.
Independent shopping perspective
The Korena take
A four-pack of 7/8 in. memory locks for drum hardware. For drummers who tear down and reset a kit and want repeatable heights.
Strong match
Who this is for
- Gigging drummers resetting the same kit heights night after night
- Rehearsal spaces where several players share one kit
- Replacing stripped or lost locks on existing stands
Consider the trade-offs
When to look elsewhere
- Hardware with tubing other than 7/8 in.
- Kits that never leave one room and never get adjusted
- Drummers wanting a lock for every tube on a full kit
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4-pack
Covers roughly two stands with upper and lower sections, or four single positions on a rack.
Detail 03
Memory lock function
Clamps to the tube as a stop, so the section drops back to the same height when you reassemble.
Detail 04
Gibraltar hardware
Common drum hardware standard, so these often fit tubes from other brands at the same diameter.
Detail 05
$15.99 price
Cheap enough to buy a second pack rather than measure heights by eye at every setup.
Final check
Know before you order
- 01Measure your tube diameter first. 7/8 in. is common but not universal.
- 02Locks fit around the tube, so the section above must come off to install.
- 03Tighten firmly. A loose lock slides and defeats the point.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit my cymbal stands?
Only if the tube section measures 7/8 in. Many stands use that size on a middle or lower section, but diameters vary by brand and by tier within a brand.
02Do they work on a rack?
Yes, on any 7/8 in. tube, including rack posts and arms of that diameter.
03How many stands does one pack cover?
Four locks. A two-section stand usually takes two, so figure about two stands per pack.
04Do I need tools?
A drum key or wrench, depending on the tension screw. Snug them by hand first, then tighten so the lock cannot creep under weight.
