Detail 01
8mm thread
The common size across most drum stand and rack clamp joints. Measure the thread on your existing screw to confirm.
Product detailSKU #1273887992766
Gibraltar8mm Wing Screw 2-Pack
1/2
Independent shopping perspective
The Korena take
Replacement 8mm wing screws, two per pack. For anyone who has lost or stripped the thumbscrews on a drum stand, rack clamp or hardware joint.
Strong match
Who this is for
- Replacing a wing screw lost in transit between gigs
- Keeping spares in the hardware bag for stand failures
- Swapping out a stripped or seized screw on existing hardware
Consider the trade-offs
When to look elsewhere
- Hardware using a metric size other than 8mm
- Anyone needing a full clamp or memory-lock assembly
- Tension rods for drum lugs — different thread and purpose
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Wing head
Tightens and loosens by hand, no drum key needed — the point is fast setup and teardown.
Detail 03
Sold as a 2-pack
Two screws per order. Most stand joints use one per clamp, so this covers two points.
Detail 04
Gibraltar hardware standard
Sized to Gibraltar's own stands and racks; also fits many other brands using the same 8mm convention.
Final check
Know before you order
- 01Measure your existing screw's thread diameter and length before ordering
- 02Two screws only — count how many joints you need to cover
- 03Not a substitute for a full clamp if the clamp body is damaged
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I know if I need 8mm?
Pull an existing wing screw and measure the threaded shaft diameter. If it is 8mm across, this is the right size.
02Will these fit non-Gibraltar stands?
Often yes. 8mm is a common drum hardware thread. Confirm by measuring your current screw.
03How many come in the pack?
Two.
04Can I use these as tension rods on a drum?
No. Tension rods use a different thread and a drum key head. These are for stand and rack clamp joints.
