Detail 01
2 in. length
Measured on the threaded shaft. Deeper lug casings need longer rods; too short and it will not catch.

Independent shopping perspective
Six 2-inch tension rods for standard drum hoops. A consumable replacement part for stripped, bent, or rusted rods.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Measured on the threaded shaft. Deeper lug casings need longer rods; too short and it will not catch.
Detail 02
Covers one head on a 6-lug drum. An 8-lug drum or a full kit needs multiple packs.
Detail 03
Pulls the hoop down to tune the head. Bent or stripped rods cause uneven tension and tuning that will not hold.
Detail 04
Fits common lug casings, but vintage and some import kits use different pitches. Compare an old rod first.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
One per lug per side. A 6-lug tom needs six for the batter head and six for the resonant, so two packs.
They use standard threading and are 2 inches long. Pull one rod from your drum and compare thread and length before ordering.
No. Rods only. If your existing washers are worn or missing, buy those separately or the rod can dig into the hoop.
Usually rust or grit in the threads. New rods and a little lug lubricant fix it. Clean the lug casings while you are in there.