Detail 01
1-3/8" length
The mounting hole spacing on the shell must match this height, or the lug will not bolt on flat.

Independent shopping perspective
Four replacement tension lugs, 1-3/8 inches tall, for repairing or completing drum hardware. Buy by measurement, not by guess.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
The mounting hole spacing on the shell must match this height, or the lug will not bolt on flat.
Detail 02
Enough for part of one drum. A 6-lug tom needs six; an 8-lug snare needs eight.
Detail 03
This is the shell-mounted receiver the rod threads into. The rods themselves are separate parts.
Detail 04
Meant to fill gaps in existing hardware, so matching your drum's finish and hole pattern matters more than brand.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Measure your current lug from mounting hole to mounting hole. If it matches 1-3/8 inches, these will bolt into the same holes.
Usually not. An 8-lug snare needs eight per drum, so you would need two packs.
No. This is four lugs only. Rods, washers and mounting screws are bought separately.
They work on any drum with matching 1-3/8 inch lug spacing and hole pattern, regardless of which drum it is.