Detail 01
24-bit operation up to 192kHz
Supports the listed sample rates from 44.1kHz through 192kHz.
Product detailSKU #1500000338204
FocusriteISA ADN8 8 Channel Dante Network A/D Card for ISA 428 MkII and 828 MkII
1/2
Independent shopping perspective
The Korena take
The ISA ADN8 adds eight channels of precision analogue-to-digital conversion to an ISA 428 MkII or ISA 828 MkII microphone preamp. It puts those channels on Dante while retaining AES3 and ADAT output options. Primary and secondary RJ45 Dante ports and BNC Word Clock I/O make it suited to a synchronised networked setup. Metering and card settings are handled in RedNet Control; Dante Controller is used to set the routing.
Strong match
Who this is for
- Connecting all eight channels of an ISA 428 MkII or ISA 828 MkII to Dante.
- Configuring network routing and card settings from Dante Controller and RedNet Control during setup.
Consider the trade-offs
When to look elsewhere
- ISA One installations; this card is specified for ISA 428 MkII and ISA 828 MkII preamps.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Internal or Word Clock clock source
Allows use of the internal clock or external BNC Word Clock.
Final check
Know before you order
- 01Confirm that your preamp is an ISA 428 MkII or ISA 828 MkII.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does the ISA ADN8 add?
It is an eight-channel A-D card.
02What output formats are available?
The card provides Dante, AES3 and ADAT connectivity.
03Are the control applications included?
Yes. RedNet Control and Dante Controller are included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20kHz ±0.1dB
4 detailsConnections & power
- Word Clock Input
- 1 x BNC 75Ω port (Switchable Termination)Word Clock Output: 1 x BNC 75 Ohm port
- Output
- 2 x TOSLINK connectors
- Input to Input
- < -100dB; 20Hz -20kHz (driven channel at -20dBFS)
- Supported Sample Rates
- 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
9 detailsOther
- Noise in Presence of Signal
- -121dBu 'A'-Weighted (typical)
- Channel Count
- 8 x ADAT channels
- Dynamic Range
- 121dB 'A'-weighted (typical), 20Hz–20kHz
- Thd N
- -105dB (0.0006%) unweighted, 20Hz–20kHz; -1dBFS input
- Channel Assignments 44 1 KHZ 48 KHZ
- Port 1 = Channels 1 -8 ,
- Channel Assignments 176 4 KHZ 192 KHZ
- SMUXII: Port 1 = Channels 1 -2 , Port 2 =
- Clock Sources
- Internal or Word Clock
- 0 Dbfs Reference Levels
- 22dBu
- Channel Assignments 88 2 KHZ 96 KHZ
- SMUXI: Port 1 = Channels 1 -4, Port 2 =
