Detail 01
24-bit operation up to 192kHz
Supports the listed sample rates from 44.1kHz through 192kHz.
Product detailSKU #1500000338201
FocusriteISA ADN2 2-Channel Dante Network A/D Card for ISA One
1/2
Independent shopping perspective
The Korena take
Bring an ISA One mic preamp and DI into a Dante-based setup with two channels of analogue-to-digital conversion. The ISA ADN2 also provides AES3, ADAT and S/PDIF digital connections, so its outputs can be arranged around the format your system uses. Primary and secondary Dante ports support network connection, while BNC Word Clock I/O provides external synchronisation. Use RedNet Control for metering and settings, then configure routing in Dante Controller.
Strong match
Who this is for
- Adding two-channel digital and Dante connectivity to an ISA One mic preamp and DI.
- Setting Dante routes during setup while accessing metering and settings through RedNet Control.
Consider the trade-offs
When to look elsewhere
- Eight-channel conversion work; this card provides two channels.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Internal or Word Clock clock source
Allows the card to use its internal clock or the BNC Word Clock connection.
Final check
Know before you order
- 01Confirm that the card is being fitted to an ISA One mic preamp and DI.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Which digital connections does the ISA ADN2 provide?
It offers Dante, AES3, ADAT and S/PDIF connectivity.
02Is routing software included?
Yes. RedNet Control and Dante Controller are included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20kHz ±0.1dB
5 detailsConnections & power
- Word Clock Input
- 1 x BNC 75 Ohm port (Switchable Termination)
- Word Clock Output
- 1 x BNC 75 Ohm port
- Output
- 1 x RCA phono socket
- Input to Input
- < -100dB; 20Hz–20kHz (driven channel at -20dBFS)
- Supported Sample Rates
- 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24-bit
9 detailsOther
- Noise in Presence of Signal
- -121dBu 'A'-Weighted (typical)
- Channel Assignments 44 1khz 48 KHZ
- Port 1 = Channels 1 -2
- Channel Count
- 2 x S/PDIF channels
- Dynamic Range
- 121dB 'A'-weighted (typical), 20Hz–20kH
- Thd N
- -105dB (0.0006%) unweighted, 20Hz–20kHz; -1dBFS input
- Clock Sources
- Internal or Word Clock
- 0 Dbfs Reference Levels
- 22dBu
- Channel Assignments 88 2khz 96 KHZ
- SMUXI: Port 1 = Channels 1 -2
- Channel Assignments 176 4khz 192 KHZ
- SMUXII: Port 1 = Channels 1 -2
