Detail 01
24 pieces
Enough to cover a full 21- or 22-fret neck with spares for mistakes during seating.
Product detailSKU #1303152053108
FenderStandard Guitar Fret Wire 24-Pieces
Independent shopping perspective
The Korena take
Replacement fret wire in Fender's standard gauge, 24 pieces. For a luthier or tech doing a refret on a Fender-style neck.
Strong match
Who this is for
- Full refret of a 21- or 22-fret Fender-style neck
- Techs keeping stock of standard-gauge wire on the bench
- Replacing a few worn frets with matching profile
Consider the trade-offs
When to look elsewhere
- Players without fret tools, a press, or leveling files
- Necks needing jumbo or stainless wire for feel or wear
- Anyone wanting a quick fix — this is a full bench job
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Pre-cut lengths, not a coil
Each piece is already sized per fret, so you skip cutting from a roll but can't do a wider board.
Detail 03
Fender standard gauge
Matches the feel of stock Fender frets, so a partial refret won't create a step in fret height.
Detail 04
Nickel-silver style wire
Cuts, crowns and levels easily with normal fret files, but wears faster than stainless under heavy bending.
Final check
Know before you order
- 01No frets tools included — you need pullers, a press or hammer, files
- 02Wire is straight; frets must be radiused to match your fingerboard
- 03Plan on a level, crown and setup after install
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit a Squier or other Fender-style neck?
It's cut to Fender standard fret dimensions, so it suits Fender-style necks with a similar fingerboard width. Measure your widest fret slot before ordering.
02Is 24 pieces enough for a whole guitar?
For a 21- or 22-fret neck, yes, with spares. A 24-fret neck leaves you no margin for error.
03Can I install these myself?
Only with fret tools and experience. Pulling frets can chip the board, and every refret needs leveling and crowning afterward.
04Are these jumbo frets?
No. This is Fender's standard gauge, matching stock fret size rather than a taller or wider jumbo profile.
