Detail 01
Deep C shape with rolled fingerboard edges
These are the neck-profile and edge details associated with its smooth, fast-playing feel.
Product detailSKU #1500000365274
FenderAmerican Professional II Stratocaster Neck, 22 Narrow-Tall Frets, 9.5" Radius, Maple
1/2
Independent shopping perspective
The Korena take
Built as a right-handed replacement neck for a Fender or Squier by Fender guitar, this American Professional II Stratocaster neck combines maple construction, a maple fingerboard, 22 narrow-tall frets, and a 9.5-inch radius. The Deep C profile, rolled fingerboard edges, and satin-finished back are intended for a smooth, fast-playing feel. Installation is a proper guitar-work job: the four offset pilot holes may require a fifth hole on a standard body, and nut work plus additional fitting or setup can be required.
Strong match
Who this is for
- A qualified replacement-neck installation on a right-handed Fender or Squier by Fender guitar.
- Players seeking a maple Stratocaster neck with 22 narrow-tall frets and a 9.5-inch radius.
- A guitar project where neck-pocket fitting, fretwork, and setup work are already planned.
Consider the trade-offs
When to look elsewhere
- Direct installation on a standard body without drilling a fifth pilot hole.
- A no-work neck swap where nut-slot cutting and possible setup procedures are not available.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Satin urethane back; gloss urethane headstock face
The back of the neck and the headstock face use different finish treatments.
Detail 03
Four offset pre-drilled pilot holes
A standard body requires a fifth pilot hole to be drilled during installation.
Detail 04
22 narrow-tall frets; 9.5-inch radius
These are the supplied fingerboard and fret specifications.
Final check
Know before you order
- 01Nut slots must be cut by qualified personnel.
- 02Plan for possible fretwork, neck-pocket fitting, and other instrument setup procedures.
- 03On a standard body, installation requires drilling a fifth pilot hole.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this neck right-handed?
Yes, it is specified for right-handed use.
02What guitars is it intended for?
It is a replacement neck for a Fender or Squier by Fender guitar.
03Are the nut slots already ready for installation?
They must be cut by qualified personnel because genuine replacement necks have not been mounted to guitar bodies.
04What happens when mounting it to a standard body?
Its neck pocket has four offset pilot holes, so a fifth pilot hole must be drilled.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SSS
8 detailsPlayability
- Orientation
- Right-handed
- Fret Size
- Narrow-tall
- Nut Width
- 1.685
- Nut Width Material
- 1.685 inch (42.8 mm) bone
- Number of Frets
- 22
- Radius
- 9.5 inch
- Scale Length
- 25.5
- Neck Shape
- Deep C
8 detailsBody & build
- Fingerboard Material
- Maple
- Country of Origin
- United States
- Body Style
- Deep C
- Body Shape
- Deep C
- Body Finish
- "Super-Natural" satin urethane finish on back, gloss urethane finish on headstock face
- Inlays
- Black dot
- Neck Wood
- Maple
- Neck Finish
- "Super-Natural" satin urethane finish on back, gloss urethane finish on headstock face
1 detailsOther
- Truss Rod
- Bi-flex
