Detail 01
Rolled fingerboard edges
They are part of the neck’s comfortable, fast-playing feel.
Product detailSKU #1500000365265
FenderAmerican Professional II Stratocaster Neck, 22 Narrow-Tall Frets, 9.5" Radius, Rosewood
1/2
Independent shopping perspective
The Korena take
The American Professional II Stratocaster neck is a right-handed replacement option for a Fender or Squier by Fender guitar. It combines a maple neck, rosewood fingerboard, 22 narrow-tall frets, and a 9.5-inch radius with a Deep C profile. Rolled fingerboard edges and the satin urethane back finish are intended for a comfortable, fast-playing feel; the headstock face is gloss urethane. Its four offset neck-pocket pilot holes require a fifth hole when mounting it to a standard body, alongside qualified nut cutting and setup work.
Strong match
Who this is for
- A right-handed Fender or Squier by Fender guitar replacement project using the four offset pilot-hole pattern.
- Players seeking a Deep C neck with rolled fingerboard edges and narrow-tall frets.
Consider the trade-offs
When to look elsewhere
- Mounting to a standard body without drilling the required fifth pilot hole.
- A neck installation that cannot include qualified nut-slot cutting and possible fitting or fretwork.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four offset pre-drilled neck-pocket pilot holes
A standard body requires a fifth pilot hole to be drilled.
Final check
Know before you order
- 01If installing on a standard body, plan to drill a fifth pilot hole.
- 02Nut slots must be cut by qualified personnel.
- 03Fretwork, neck-pocket fitting, and other setup procedures may be required.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will it mount to a standard body as drilled?
The neck has four offset pilot holes. A standard body installation requires drilling a fifth pilot hole.
02What is the fingerboard material?
The fingerboard is rosewood.
03Does the nut require finishing?
Yes. Qualified personnel must cut the nut slots before installation.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SSS
8 detailsPlayability
- Orientation
- Right-handed
- Fret Size
- Narrow-tall
- Nut Width
- 1.685
- Nut Width Material
- 1.685 inch (42.8 mm) bone
- Number of Frets
- 22
- Radius
- 9.5 inch
- Scale Length
- 25.5
- Neck Shape
- Deep C
8 detailsBody & build
- Fingerboard Material
- Rosewood
- Country of Origin
- United States
- Body Style
- Deep C
- Body Shape
- Deep C
- Body Finish
- "Super-Natural" satin urethane finish on back, gloss urethane finish on headstock face
- Inlays
- White dot
- Neck Wood
- Maple
- Neck Finish
- "Super-Natural" satin urethane finish on back, gloss urethane finish on headstock face
1 detailsOther
- Truss Rod
- Bi-flex
