Detail 01
Two-ply EMAD2 batter: 7 mil plus 10 mil
The batter head combines two film thicknesses in its construction.

Independent shopping perspective
EMAD2 System Pack pairs a 22-inch EMAD2 batter head with an EMAD resonant head for bass-drum setup. The batter head combines 7-mil and 10-mil film plies, then lets you alter sustain with either of two interchangeable damping rings. On the resonant side, an offset 4-inch microphone port and foam ring at its outer edge provide overtone control. Both heads use EVANS Level 360 technology.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
The batter head combines two film thicknesses in its construction.
Detail 02
You can change the batter head's sustain by changing damping rings.
Detail 03
The resonant head has an offset port and a foam ring around its outside edge for overtone control.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
It includes an EMAD2 batter head and an EMAD resonant head.
The EMAD2 batter head uses two interchangeable damping rings to adjust sustain.
Yes. It has an offset 4-inch microphone port with a foam damping ring around the external edge.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.