Korena
Product detailSKU #1500000408721

EvansEMAD2 System Pack 20 in.

Evans
EVANS EMAD2 System Pack 20 in.
1/5

Independent shopping perspective

The Korena take

Sized for a 20-inch bass drum, the EMAD2 System Pack supplies an EMAD2 batter head and an EMAD resonant head. The batter combines one 7-mil and one 10-mil film ply, with two interchangeable damping rings for changing sustain. Its resonant counterpart uses a single 10-mil ply, an offset 4-inch microphone port, and a foam ring around the port's outer edge to control overtones. Both heads feature EVANS Level 360 technology.

EVANS EMAD2 System Pack 20 in. product detail
Product studyEVANS EMAD2 System Pack 20 in.
EVANS EMAD2 System Pack 20 in. alternate view
Alternate view

Strong match

Who this is for

  • Outfitting a 20-inch bass drum with matched batter and resonant EMAD heads.
  • Bass-drum setups where sustain is adjusted by swapping between the two damping rings.
  • Miking through an offset 4-inch port in the resonant head.

Consider the trade-offs

When to look elsewhere

  • Bass drums that require a size other than 20 inches.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

EVANS EMAD2 System Pack 20 in. construction detail

Detail 01

Two-ply EMAD2 batter: 7 mil plus 10 mil

The batter head combines two film thicknesses in its construction.

Detail 02

Two interchangeable damping rings

You can change the batter head's sustain by changing damping rings.

Detail 03

Offset 4 in. microphone port with foam ring

The resonant head has an offset port and a foam ring around its outside edge for overtone control.

Final check

Know before you order

  1. 01Confirm that your bass drum uses a 20-inch head before ordering.
EVANS EMAD2 System Pack 20 in. close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What heads are in the pack?

It includes an EMAD2 batter head and an EMAD resonant head.

02How is sustain adjusted?

The EMAD2 batter head uses two interchangeable damping rings to adjust sustain.

03Does the resonant head have a microphone port?

Yes. It has an offset 4-inch microphone port with a foam damping ring around the external edge.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Body Shape
Offset