Korena
Product detailSKU #1500000279027

Electro-VoiceWireless head with ND86 capsule

Electro-Voice logo
Electro-Voice Wireless head with ND86 capsule
1/2

Independent shopping perspective

The Korena take

Built as a dynamic thread-on vocal head for wireless handheld transmitters, the ND86-RC3 combines a large Mylar diaphragm with a shock-mounted capsule to keep mechanical vibration out of the mix. Its free-spinning ID collar can be aligned before the head is fully tightened. A hydrophobic diaphragm membrane and humbucking coil add protection against debris, moisture, AC hum, and electromagnetic interference. The head uses the common three-contact-ring, 1.25-inch/28-thread coupling convention.

Electro-Voice Wireless head with ND86 capsule product detail
Product studyElectro-Voice Wireless head with ND86 capsule

Strong match

Who this is for

  • Wireless handheld vocal setups needing a thread-on head with handling-noise reduction.
  • Stage setups positioned near speaker cabinets or equipment racks generating electromagnetic interference.

Consider the trade-offs

When to look elsewhere

  • Transmitters that do not use the common three-contact-ring, 1.25-inch diameter, 28-thread-pitch coupling convention.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

4-point suspension with tuned pneumatic pump

The capsule mounting is designed to reduce mechanical vibrations and handling noise in the mix.

Detail 02

Hydrophobic cloth membrane

Helps keep moisture and debris from reaching the diaphragm.

Detail 03

Humbucking coil

Attenuates AC hum and electromagnetic interference.

Detail 04

134.5 dB SPL maximum (1% THD)

The supplied maximum-SPL rating is measured at 1% total harmonic distortion.

Final check

Know before you order

  1. 01Verify the transmitter uses the common 3-contact-ring, 1.25-inch diameter, 28-thread-pitch coupling.
  2. 02The head requires 4–8 VDC.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the branding be aligned with the transmitter?

Yes. The captured ID collar rotates freely until the head is tightened, then remains locked in its selected orientation.

02What frequency response is listed?

The far response is 70 Hz–17 kHz; the close response is 30 Hz–17 kHz.

03What pickup pattern is specified?

The specifications list a supercardioid polar pattern.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsSound
Frequency Response Far
70 Hz-17 kHz
Frequency Response Close
30 Hz-17 kHz
Polar Pattern
Supercardioid
Impedance
1000 ohms
1 detailsPickups & controls
Sensitivity Open Circuitvoltage 1 KHZ
5.6 mV/Pascal (-45 dBV/Pa)
1 detailsConnections & power
Power Requirements
4-8 VDC
2 detailsOther
Element Type
Dynamic neodymium magnet structure
Maximum SPL
134.5 dB SPL (1% THD)

Complete your setup

Worth comparing

More from Electro-Voice