Korena
Product detailSKU #1274115035714

Electro-VoiceSX100+ Passive Loudspeaker Black

Electro-Voice logo
Electro-Voice SX100+ Passive Loudspeaker Black
1/5

Independent shopping perspective

The Korena take

Two-way 12-inch passive PA cabinet, 65-degree coverage, fly points included. For installs and rigs that already have an amp and processing.

Electro-Voice SX100+ Passive Loudspeaker Black product detail
Product studyElectro-Voice SX100+ Passive Loudspeaker Black
Electro-Voice SX100+ Passive Loudspeaker Black alternate view
Alternate view

Strong match

Who this is for

  • Fixed installs where a rack amp lives in a closet
  • Bands with an existing amp rack and a mixer
  • Rooms needing a tight, controlled 65-degree pattern

Consider the trade-offs

When to look elsewhere

  • Anyone without a power amp — there's no amplifier inside
  • Outdoor use, since it isn't weather-rated
  • Solo acts wanting one box to carry and plug in

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Electro-Voice SX100+ Passive Loudspeaker Black construction detail

Detail 01

Passive, 8 ohms nominal

Needs an external power amp. Impedance drops to 5.6 ohms at minimum, so check your amp's rating before daisy-chaining.

Detail 02

98 dB sensitivity, 127 dB max SPL

Efficient. It gets loud on modest amp power compared to a lower-sensitivity cabinet of the same size.

Detail 03

200/400/800 watts continuous/program/peak

Match an amp to the program rating around 400 watts per side. Sizing to peak invites blown drivers.

Detail 04

65 x 65 degree coverage

Narrow and symmetrical. Throws down a defined area rather than washing the room — good for rows, less so for wide side seating.

Detail 05

60 Hz to 20 kHz (-10 dB)

Full-range down to 60 Hz. Kick drum and low bass will want a subwoofer underneath.

Detail 06

Parallel NL4 connectors, flyable, 32 lb

Two NL4 jacks let you loop to a second cabinet. Fly points are built in for permanent hangs.

Final check

Know before you order

  1. 01No power amp, speaker cable, stand, or rigging hardware included
  2. 02Flying needs proper hardware and someone who knows load ratings
  3. 03Listed as black finish; color fields also show white — confirm before ordering
Electro-Voice SX100+ Passive Loudspeaker Black close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Do I need an amplifier for this?

Yes. It's passive, so it has no internal amp. You'll need a power amp rated appropriately at 8 ohms plus speaker cable with NL4 connectors.

02Can I use these outdoors?

It isn't rated for outdoor use. Weather exposure risks the drivers and cabinet, so keep it under cover or indoors.

03Do I need a subwoofer?

It reaches 60 Hz, which covers most vocals and instruments. Add a sub if you're running kick drum, bass guitar, or recorded music.

04How many can I run off one amp channel?

Two cabinets in parallel drop the load to roughly 4 ohms nominal, with a 5.6 ohm minimum per box. Confirm your amp is stable at that load first.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

6 detailsSound
Nominal Impedance Passive
8 Ohms
Speaker Type
Fullrange, Mid-High, Two-Way
Sensitivity 1w 1m
98 dB
Frequency Response 10db
60 - 20000 Hz
Crossover Frequency
1500 Hz
Minimum Impedance
5.6 Ohms
2 detailsBody & build
Color
White
Color Finish
Black
2 detailsConnections & power
Input Connections
Parallel Neutrik NL4
System Power Handling Continuous Program Peak
200/400/800 watts
2 detailsSize & weight
Dimensions Hxwxd
586 x 429 x 312 mm
Weight Net
14.5 kg ( 31.97 lb.)
8 detailsOther
Chassis Size
12 inch
Coverage Nominal 6db H
65
Outdoor
No
Directivity Index
11.1 dB
Flying
Yes
Max SPL 1m Calc
127 dB
Internal Crossover
Yes
Coverage Nominal 6db V
65

Complete your setup

Worth comparing

More from Electro-Voice