Detail 01
Integrated DSP with rear-panel LCD
Gives access to EQ, boundary compensation, delay, output limiting, and stored settings.
Product detailSKU #1393256930588
Electro-VoiceETX-12P 12" 2,000W 2-Way Powered Loudspeaker
1/6
Independent shopping perspective
The Korena take
ETX-12P is a 2,000W, two-way powered loudspeaker built around a 12-inch woofer and 1.25-inch titanium compression driver. It is positioned for musicians, presenters and DJs who need full-range PA coverage from a self-powered cabinet. Rear-panel LCD access puts EQ, boundary compensation, delay and output limiting at hand, with settings available for recall. The enclosure can work as a standalone PA cabinet, a floor monitor, on a pole, or in a suspended installation.
Strong match
Who this is for
- Musicians, presenters and DJs needing a self-powered full-range loudspeaker for portable performance systems.
- Stage setups that use the cabinet's floor monitor angles, pole mount, or suspension points.
- Venue systems needing rear-panel DSP adjustment and recallable settings.
Consider the trade-offs
When to look elsewhere
- Systems requiring response below the stated 43Hz lower limit.
- Coverage needs outside its nominal 90° horizontal by 60° vertical pattern.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
(2) XLR/TRS combo jacks and (1) XLR link output
Provides two combo input connections plus a link output for system routing.
Detail 03
23.6 kg (52.03 lb.) net weight
This is the stated net cabinet weight for transport planning.
Detail 04
135 peak dB maximum SPL
The specified maximum output is 135 peak dB.
Final check
Know before you order
- 01Confirm that the 90° horizontal by 60° vertical coverage pattern matches the listening area.
- 02Choose the intended placement method: pole mount, floor monitor angles, or one of eight M10 suspension points.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can ETX-12P settings be saved?
Yes. Its DSP can store and recall settings.
02What is the stated frequency range?
The stated frequency range is 43Hz–20kHz.
03What connections does it provide?
It has two XLR/TRS combo jacks and one XLR link output.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Range
- 43Hz–20kHz
- Frequency Response
- 55Hz–20kHz
- Crossover Frequency
- 1,600Hz
2 detailsBody & build
- Color
- Red
- Enclosure Material
- 18 mm, 13-ply birch plywood with EVCoat
3 detailsConnections & power
- Power Consumption
- 100–240V, 50–60Hz, 1.6–0.8A
- Power Rating
- 2,000W
- Connector Type
- (2) XLR/TRS combo jack and (1) XLR link output
6 detailsSize & weight
- Weight
- 26.8
- Depth
- 400 mm (15.75 inch)
- Width
- 381 mm (15 inch)
- Shipping Weight
- 26.8 kg (59.08 lb.)
- Weight Net
- 23.6 kg (52.03 lb.)
- Height
- 613 mm (24.13 inch)
7 detailsOther
- Coverage Nominal 6db H
- 90º
- Hf Transducer
- DH3-B 1.25 inch titanium compression driver
- Maximum SPL
- 135 peak dB
- Suspension
- (8) M10 suspension points
- Lf Transducer
- SMX2120 300 mm (12 inch)
- Grill
- 16AWG steel with powdercoat
- Coverage Nominal 6db V
- 60º
