Detail 01
20.3 kg (44.75 lb.) net weight
Keeps the ETX-10P within the lighter, more portable end of the ETX range.
Product detailSKU #1393256930541
Electro-VoiceETX-10P 10" 2,000W 2-Way Powered Loudspeaker
Sale
1/6
Independent shopping perspective
The Korena take
ETX-10P is the compact member of the ETX powered PA range, combining a 10-inch woofer, 1.25-inch titanium compression driver and 2,000W power rating in a 20.3 kg enclosure. Its SST waveguide and FIR-Drive DSP are designed for precise coverage, while the 65Hz–20kHz frequency range keeps the system focused on full-range PA duties. Two combo inputs and an XLR link output make it straightforward to place in a portable sound system.
Strong match
Who this is for
- Musicians carrying a powered PA speaker between rehearsal spaces, stages and other portable setups.
- PA setups that need two XLR/TRS combo inputs and an XLR link output.
Consider the trade-offs
When to look elsewhere
- Systems requiring response below the stated 65Hz lower limit.
- Coverage requirements outside its nominal 90° horizontal by 60° vertical pattern.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
(2) XLR/TRS combo jacks and (1) XLR link output
Provides two combo input connections plus a link output for system routing.
Detail 03
(8) M10 suspension points
Supports suspension-based installation where those mounting points are required.
Detail 04
134 peak dB maximum SPL
The specified maximum output is 134 peak dB, measured at 1 m with broadband pink noise.
Final check
Know before you order
- 01Confirm that the 90° horizontal by 60° vertical coverage pattern suits the area being covered.
- 02For suspended installation, plan around the eight M10 suspension points.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What drivers are fitted in the ETX-10P?
It uses a 10-inch SMX2100 low-frequency transducer and a DH3-B 1.25-inch titanium compression driver.
02What is its stated frequency range?
The stated frequency range is 65Hz–20kHz.
03How much does it weigh?
Its net weight is 20.3 kg (44.75 lb.).
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Range
- 65Hz–20kHz full space measurement using the music DSP preset and 150Hz low pass
- Frequency Response
- 85Hz–20kHz full space measurement using the music DSP preset and 150Hz low pass
- Crossover Frequency
- 1,700Hz
2 detailsBody & build
- Color
- Red
- Enclosure Material
- 18 mm, 13-ply birch plywood with EVCoat
3 detailsConnections & power
- Power Consumption
- 100–240V, 5–60Hz, 1.60–.8A Current rating is 1/8 power
- Power Rating
- 2,000W
- Connector Type
- (2) XLR/TRS combo jack and (1) XLR link output
4 detailsSize & weight
- Depth
- 365 mm (14.37 inch)
- Width
- 330 mm (12.99 inch)
- Weight Net
- 20.3 kg (44.75 lb.)
- Height
- 526 mm (20.71 inch)
7 detailsOther
- Hf Transducer
- DH3-B 1.25 inch titanium compression driver
- Coverage Nominal 6 DB H
- 90º
- Maximum SPL
- 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output
- Coverage Nominal 6 DB V
- 60º
- Suspension
- (8) M10 suspension points
- Lf Transducer
- SMX2100 254 mm (10 inch)
- Grill
- 16AWG steel with powdercoat
