Detail 01
134 dB SPL peak
DPA specifies this as the level the microphones handle before clipping.
Product detailSKU #1500000408626
DPA Microphones4560 CORE Binaural Headset, Normal SPL, Black, MicroDot
Independent shopping perspective
The Korena take
For binaural recording, the 4560 CORE places two hand-selected 4060 CORE omnidirectional microphones on earhooks to capture sound from positions close to the listener's ears. The stereo pair is sensitivity-matched within ±1.5 dB. Its adjustable headset accommodates different ear and head shapes, mounting securely and remaining unobtrusive. Because the capsules are omnidirectional, they do not require direct aiming; this pattern is also less sensitive to handling, pop, and wind noise. Supplied foam windscreens help hold the microphones in position and moderate wind noise.
Strong match
Who this is for
- Immersive binaural recording that positions two omnidirectional microphones close to the listener's ear locations.
- Recording a remote or damped sound source where improved signal-to-noise balance is needed.
Consider the trade-offs
When to look elsewhere
- Applications requiring a directional microphone pattern, since this headset uses two omnidirectional capsules.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Sensitivity matching within ±1.5 dB
The two microphones are handpicked as a closely matched stereo pair.
Final check
Know before you order
- 01Foam windscreens are supplied to secure microphone placement in the ear and damp wind noise.
- 02For full wireless performance, the specifications call for 5–10 V through a DPA adapter.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Are the two microphones matched?
Yes. They are handpicked 4060 CORE microphones selected within ±1.5 dB of sensitivity.
02Does the headset need precise aiming?
No. The omnidirectional capsules do not need to point directly at the sound source for quality pickup.
03Will it adjust to different head shapes?
Yes. The headset adjusts for different ear sizes and head shapes while mounting securely.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Sensitivity Selection Tolerance At 1 KHZ
- ±1.5 dB
- Effective Frequency Range 2 DB
- Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
- Frequency Response
- 20 Hz - 20 kHz
- Sensitivity Nominal 3 DB At 1 KHZ
- 20 mV/Pa; -34 dB re. 1 V/Pa
1 detailsBody & build
- Color
- Black
3 detailsConnections & power
- Power Supply For Full Performance
- For wireless systems: Min. 5 V - max. 10 V through DPA adapter. With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
- Rated Output Impedance
- 30 - 40 Ω
- Connector
- MicroDot
5 detailsSize & weight
- Cable Length
- 1.8 m (5.9 ft)
- Equivalent Noise Level A Weighted
- Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
- Microphone Length
- 12.7 mm (0.5 in)
- Weight
- 7.5
- Microphone Diameter
- 5.4 mm (0.21 in)
14 detailsOther
- Cable Drive Capability
- Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
- Current Consumption
- Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Distortion Thd Lt 1 Legacy
- 120 dB SPL RMS, 123 dB SPL peak
- Temperature Range
- -40°C to 45°C (-40°F to 113°F)
- Relative Humidity Rh
- Up to 90%
- Polarity
- Positively increasing sound pressure produces positive going voltage on MicroDot pin
- Cartridge Type
- Pre-polarized condenser
- Equivalent Noise Level Itu R Bs 468 4
- Typ. 35 dB (max. 38 dB)
- Directional Pattern
- Omnidirectional
- Distortion Thd Lt 1 Core
- 126 dB SPL RMS, 129 dB SPL peak
- Max SPL Thd 10
- 134 dB SPL peak
- Principle of Operation
- Pressure
- Dynamic Range Core
- Typ. 106 dB
- Dynamic Range Legacy
- Typ. 100 dB
