Detail 01
Omnidirectional pressure-operated capsule
Captures sound with an omnidirectional pickup pattern.
Product detailSKU #1500000408649
DPA Microphones6060 CORE Omni Submini Mic, Normal SPL, Beige, TA4F Mini-XLR
Independent shopping perspective
The Korena take
Built for low-profile placement, the beige 6060 CORE combines a 3 mm omnidirectional capsule with a TA4F Mini-XLR connection. CORE technology is used here to reduce distortion, including at high sound-pressure levels. The cable has a Kevlar inner core, 1.6 mm diameter, and integrated strain relief at the mic housing. Its removable cap clicks back into place after cleaning, while IP58 certification and PVD-treated stainless-steel parts support demanding use.
Strong match
Who this is for
- Wireless-system setups using a TA4F Mini-XLR input and the required DPA adapter.
- Applications where a very small beige microphone is preferred for a less conspicuous appearance.
- High-level sound sources within the microphone's specified SPL limits.
Consider the trade-offs
When to look elsewhere
- Wireless systems that do not accept a TA4F Mini-XLR microphone connection.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
1.8 m cable
Provides 1.8 m of cable length between the microphone and its connector.
Detail 03
IP58 certification
The cover and housing use water-repellent nano-coating, and the amplifier is hermetically sealed.
Detail 04
40 Hz–20 kHz effective range; 4 dB soft boost at 8–20 kHz
The response includes a specified soft high-frequency boost from 8 to 20 kHz.
Final check
Know before you order
- 01Confirm that your wireless system uses TA4F Mini-XLR and a compatible DPA adapter.
- 02For full wireless-system performance, the specified supply is 5–10 V through a DPA adapter.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the microphone cap be cleaned?
Yes. The cap can be removed for cleaning and reattached to the microphone body with an audible and tactile click.
02What connector does it use?
It uses a TA4F Mini-XLR connector.
03Can it be used with phantom power?
With the DAD6001-BC XLR Adapter, it uses P48 phantom power and will work from 12 V.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Effective Frequency Range 2 DB
- 40 Hz - 20 kHz with 4 dB soft boost at 8 - 20 kHz
- Sensitivity Nominal 2 4 DB At 1 KHZ
- 20 mV/Pa; -34 dB re. 1 V/Pa
- Frequency Response
- 20 Hz - 20 kHz
1 detailsBody & build
- Color
- Beige
3 detailsConnections & power
- Rated Output Impedance
- 30 - 40 Ω
- Power Supply For Full Performance
- For wireless systems: Min. 5 V - max. 10 V through DPA adapter. With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
- Connector
- TA4F Mini-XLR
3 detailsSize & weight
- Cable Length
- 1.8 m (5.9 ft)
- Weight
- 8
- Equivalent Noise Level A Weighted
- Typ. 24 dB(A) re. 20 μPa (max. 26 dB(A))
12 detailsOther
- Microphone Head Size H X W X D
- 3.4 / 14.4 mm (0.13 / 0.57 in)
- Cartridge Type
- Pre-polarized condenser
- Distortion Thd Lt 1
- 123 dB SPL RMS, 126 dB SPL peak
- Directional Pattern
- Omnidirectional
- Max SPL Thd 10
- 134 dB SPL peak
- Cable Drive Capability
- Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
- Dynamic Range
- Typ. 102 dB
- Principle of Operation
- Pressure
- Current Consumption
- Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Temperature Range
- -40°C to 45°C (-40°F to 113°F)
- Relative Humidity Rh
- Up to 90%
- Polarity
- Positively increasing sound pressure produces positive going voltage on MicroDot pin
