Korena
Product detailSKU #1274228081004

Denis WickDW6880 HeavyTop Series Trombone Mouthpiece in Silver 1AL

Denis Wick
Denis Wick DW6880 HeavyTop Series Trombone Mouthpiece in Silver 1AL
1/2

Independent shopping perspective

The Korena take

Large-shank trombone mouthpiece with a 27.11mm cup and open backbore. For tenor and bass trombone players wanting a big, free-blowing sound.

Denis Wick DW6880 HeavyTop Series Trombone Mouthpiece in Silver 1AL product detail
Product studyDenis Wick DW6880 HeavyTop Series Trombone Mouthpiece in Silver 1AL

Strong match

Who this is for

  • Large-bore tenor or bass trombone players needing a wide rim
  • Players who want less resistance and a freer air stream
  • Anyone moving up from a smaller cup for more low end

Consider the trade-offs

When to look elsewhere

  • Small-shank horns — the large shank will not seat
  • Lead and commercial players wanting a compact, bright sound
  • Players with limited air support; the open blow eats air

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

27.11mm cup diameter

One of the widest in this range. More lip inside the cup means bigger low register but faster fatigue.

Detail 02

Large shank

Fits large-bore tenor and bass trombone receivers only. Small-bore horns need the small-shank version.

Detail 03

Open backbore

Less resistance behind the throat. The horn blows freer and opens up at volume, but takes more air.

Detail 04

7.45mm throat

Wide throat passes more air than the 6.66mm sizes, favoring volume and low-register body over pinpoint articulation.

Detail 05

6.09mm rim width

Narrow rim for this cup size. More flexibility and slur control, less cushion on long sessions.

Detail 06

Silver plating

Slightly grippier feel than gold and a firmer response. Some players react to silver against the skin.

Final check

Know before you order

  1. 01Check your receiver — large shank only, and it will not adapt down
  2. 02Mouthpiece only; no pouch, case, or brush included
  3. 03Give your embouchure a few weeks before judging a rim change

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this fit my trombone?

Only if your horn has a large-shank receiver, which is typical of large-bore tenors and bass trombones. Small-bore tenors take a small shank and will not accept it.

02Is 1AL good for bass trombone?

Yes. The 27.11mm cup and 7.45mm throat suit bass trombone, and the open backbore supports the low register with a free blow.

03How is this different from the 4AL?

The 4AL is a 26mm cup with a barrel backbore and a wider 6.72mm rim. The 1AL is wider in the cup, narrower on the rim, and blows more openly.

04Silver or gold plating — does it matter?

Silver feels grippier and a touch firmer on the lip. Gold feels smoother and slicker. Players with a silver sensitivity should choose gold.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
Silver
8 detailsOther
6bl
Large shank; 25.40mm cup diameter; 6.26mm rim width; 6.66mm throat; V-type backbore. Excellent high register with a crisp clear tone.
5al
Large shank; 25.73mm cup diameter; 6.64mm rim width; 7.30mm throat; Barrel backbore. Full sound with resonant high register. Good choice for orchestral work.
6bs
Small shank; 25.40mm cup diameter; 6.26mm rin width; 6.66mm throat; V-type backbore. Brilliant high register with increased endurance and intontation.
0al
Large shank; 27.42mm cup diameter; 6.09mm rim width; 7.45mm throat; Barrel backbore. Clean low register with accurate attacks.
1al
Large shank; 27.11mm cup diameter; 6.09 rim width; 7.45mm throat; Open backbore. Improved high range and open, free blowing sound.
4 5al
Large shank; 25.85mm cup diameter; 6.80mm rim width; 7.24mm throat; Barrel backbore. Wider rim for improved endurance and comfort with a big, full sound.
4al
Large shank; 26mm cup diameter; 6.72mm rim width; 7.38mm throat; Barrel backbore. Deep cup for a very big, open sound and full low register.
5bl
Large shank; 25.73mm cup diameter; 6.64mm rim width; 6.87mm throat; Medium backbore. Medium-deep cup with a flexible high range. Excellent for principal players.

Worth comparing

More from Denis Wick