Detail 01
13-pin DIN GK input
This is the source-side connection for 13-pin GK equipment.

Independent shopping perspective
The BOSS GKC-AD links earlier 13-pin GK sources to the newer Serial GK input used by the GM-800 Guitar Synthesizer. Use it with a Roland GK-3 or GK-3B divided pickup, or with an instrument equipped with a 13-pin GK output, when bringing that signal into the GM-800 workflow. The converter provides a 13-pin DIN GK input and a 1/4-inch TRS GK output specified for BGK cable only, alongside a separate 1/4-inch guitar output. It runs from an AC adaptor; its USB Micro-B port is only for program updates.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
This is the source-side connection for 13-pin GK equipment.
Detail 02
Allow 240 mA in the adaptor-powered setup.
Detail 03
The USB port is limited to program updates.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
It allows a Roland GK-3, GK-3B, or instrument with a 13-pin GK output to drive the GM-800 Serial GK input.
Yes. Instruments equipped with a 13-pin GK output are identified as supported sources.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.