Detail 01
Dual 10-band EQ channels
Each channel offers ten EQ bands and its own level slider.
Product detailSKU #1500000284673
BOSSEQ-200 Equalization Effects Pedal
1/5
Independent shopping perspective
The Korena take
EQ-200 gives guitar and bass players two independent 10-band EQ channels, each with its own level slider and up to 15 dB of cut or boost per band. Its display shows the active EQ curve, so adjustments remain visible at a glance. Configure the channels in stereo, parallel, or series, or place external pedals before and/or after the EQ stages for deeper tone shaping. Four memories and a Manual setting support fast changes, with external footswitch, expression-pedal, and MIDI options available.
Strong match
Who this is for
- Stereo, parallel, or series EQ routing where two channels need to work independently or together.
- Pre- and post-EQ shaping around external overdrive or distortion pedals for rhythm and lead setups.
- Performances that need fast recall of four stored EQ configurations.
Consider the trade-offs
When to look elsewhere
- More than four saved EQ configurations for instant recall; the additional Manual setting reflects the current panel controls.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Up to ±15 dB per band
Each band can be cut or boosted by up to 15 dB.
Detail 03
Three frequency ranges
The band centers can be set to 30 Hz–12.8 kHz, 32 Hz–16 kHz, or 28 Hz–14 kHz.
Detail 04
Stereo, parallel, or series routing
The two EQ channels can be configured for different signal-flow structures.
Detail 05
Pre/post external-pedal insert
An external pedal or chain can be patched before and/or after the EQ processing.
Detail 06
Four memories plus Manual
Four saved setups are available, while Manual reflects the current panel settings.
Final check
Know before you order
- 01MIDI I/O is provided on mini TRS jacks.
- 02Four onboard memory locations are available; Manual uses the current panel settings.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the two EQ channels be used separately?
Yes. The A and B channels can operate independently or be linked together.
02Can I place another pedal around the EQ?
Yes. An external pedal or pedal chain can be inserted for pre-EQ and/or post-EQ processing.
03Does it show the EQ curve?
Yes. Its onboard graphic display shows the current EQ curve.
04Can an expression pedal control EQ-200 levels?
Yes. An expression pedal can control channel A, channel B, or overall output level.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsOther
- Three Different Range Settings
- 30Hz to 12.8kHz, 32Hz to 16kHz and 28Hz to 14kHz
