Detail 01
2-inch thickness
Absorbs mids and highs well, drops off in the low mids. Thicker foam or a wall gap extends its useful range downward.

Independent shopping perspective
Twelve 24x24x2-inch charcoal pyramid foam panels. For treating a small mixing room or booth where mid and high reflections are the problem.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Absorbs mids and highs well, drops off in the low mids. Thicker foam or a wall gap extends its useful range downward.
Detail 02
Textured face scatters some sound and adds surface area versus flat foam. The visual difference is bigger than the acoustic one.
Detail 03
Two-foot squares tile cleanly and are easy to lay out on a wall grid without cutting.
Detail 04
48 square feet total — a realistic first treatment for one small room rather than a partial job.
Detail 05
Dark gray hides dust and reads neutral on camera, but noticeably darkens a small room.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Twelve panels covers 48 square feet, enough for first reflection points and part of the rear wall. Full coverage needs more.
At the same thickness, absorption is very close. Pick on appearance; thickness and placement matter far more than surface pattern.
Yes, and the ceiling reflection point above the mix position is worth treating. Use adhesive rated for overhead loads.
Not much. Absorption falls off below the low mids. Corner bass traps handle low frequencies; foam panels don't.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.