Detail 01
2 inches thick
Effective on mids and highs. Below roughly 250Hz it does little, so boom and rumble stay untouched.

Independent shopping perspective
Twelve 2'x2' wedge foam panels covering 48 square feet. The entry point for controlling reflections in a small recording space.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Effective on mids and highs. Below roughly 250Hz it does little, so boom and rumble stay untouched.
Detail 02
Small squares work around obstacles and let you build checkerboard patterns. More seams than 2'x4' for the same area.
Detail 03
Covers side-wall reflection points and a bit of rear wall in a small room. Not a full-room solution.
Detail 04
Angled surface gives a directional scatter. Rotating alternate panels 90 degrees evens out the reflection pattern.
Detail 05
Enough pieces to cover both side reflection points plus behind the mic with panels left over.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
For taming echo, harsh reflections, and improving vocal recordings, yes. For controlling bass buildup in corners, no — that needs thicker absorption or dedicated traps.
Auralex recommends their Foamtak spray or Tubetak adhesive, which are sold separately. Adhesive can pull paint on removal, so consider mounting to boards instead.
The points where sound bounces off side walls into your listening or mic position, then the wall behind the mic. Ceiling above the desk comes next.
Not much. At the same thickness they absorb about the same. Placement and how much total surface you cover matter far more than the cut pattern.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.