Detail 01
4 inches thick
Doubling thickness extends useful absorption noticeably lower, into the low mids where 2" panels stop working.

Independent shopping perspective
Six 2'x2' wedge panels at 4 inches thick with an NRC of 1.10. The thicker option, for reaching further down into low-mid frequencies.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Doubling thickness extends useful absorption noticeably lower, into the low mids where 2" panels stop working.
Detail 02
Averages high absorption across the tested range. Above 1.0 reflects the edge exposure of the test panel, not extra material.
Detail 03
24 square feet total. Treats key reflection points or corners, not a whole room.
Detail 04
Reads as neutral against most wall colors and shows dust less than lighter finishes.
Detail 05
Angled face scatters direction. Alternating panel orientation on a wall spreads that scatter more evenly.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
If your problem is boxiness or thickness in the low mids, yes. If you only hear harsh high-frequency echo, 2 inch does that job for less money over more area.
Six panels is 24 square feet. That covers first reflection points or a couple of corners. Most rooms need more total coverage to hear a full change.
Straddled across corners they help in the low mids. True bass control below roughly 100Hz needs deeper or denser absorbers than foam.
It is an averaged absorption rating across mid frequencies. Higher is more absorptive. Ratings above 1.0 come from how edges are exposed during testing.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.