Korena
Product detailSKU #1500000318596

Audio-Technica3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2

Audio-Technica logo
Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2
1/7

Independent shopping perspective

The Korena take

Audio-Technica's fourth-generation 3000 Series DE2 system pairs the ATW-R3210N network-enabled receiver with an ATW-T3201 body-pack transmitter and BP892xcH-TH omnidirectional headworn microphone. It works across 470.125–529.975 MHz, with receiver scanning, IR synchronization, and a selectable backup frequency for unexpected interference. Wireless Manager software handles network monitoring and control; the network connection does not carry audio. The receiver retains a balanced XLR output, while the metal transmitter uses a locking cH-style four-pin connector and runs on two AA batteries.

Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2 product detail
Product studyAudio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2
Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2 alternate view
Alternate view

Strong match

Who this is for

  • Headworn wireless use requiring receiver scanning, IR synchronization, and a quickly selectable backup frequency.
  • Installed systems that need network monitoring and control through Audio-Technica Wireless Manager software.
  • Open-area wireless operation within the stated typical 300-foot operating range without interfering signals.

Consider the trade-offs

When to look elsewhere

  • Systems that require a 1/4-inch receiver audio output.
  • Workflows expecting audio to travel over the network connection.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2 construction detail

Detail 01

DE2 tuning range: 470.125–529.975 MHz

This system is the DE2-band version of the 3000 Series.

Detail 02

True-diversity receiving system

The receiver uses true-diversity reception.

Detail 03

Switchable RF output: 10 mW or 30 mW

The transmitter provides selectable low and high RF power settings.

Detail 04

Typical operating range: 100 m (300 feet)

That figure applies in an open environment without interfering signals.

Detail 05

Balanced XLR output

Audio leaves the network-enabled receiver through its balanced XLR connection.

Final check

Know before you order

  1. 01Two 1.5 V AA batteries are required for the transmitter and are not included.
  2. 02Network functionality is for Wireless Manager monitoring and control, not network audio.
  3. 03The stated 300-foot range assumes an open environment with no interfering signals.
Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2 close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What microphone is supplied with this system?

It includes the BP892xcH-TH MicroSet omnidirectional condenser headworn microphone.

02Does the network port send audio?

No. It provides monitoring and control through Audio-Technica Wireless Manager software.

03Does the receiver have a 1/4-inch output?

No. Network-enabled receivers retain the balanced XLR output but do not have a 1/4-inch audio output.

04How is the transmitter powered?

It uses two AA batteries; they are not included.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Minimum Frequency Step
25kHz
Frequency Response
T3201: 40Hz-13kHz (-3dB)
Rf Sensitivity
20dBuV at 60dB S/N ratio
5 detailsConnections & power
Input Connection
Pin1: GND
Rf Power Output
High: 30mw, Low: 10mW at 50Ω, switchable
Antenna Input
BNC-Type, 50Ω
Power Requirements
12V, 1A
Maximum Output Level
XLR. Balanced: +14dBV
3 detailsSize & weight
Net Weight
0.22 lb
Weight
2.4
Dimensions
3.2” x 2.5” x 0.9”
1 detailsIn the box
Accessories Included
Two flexible UHF antennas, AC adapter (country dependent), rack-mount adapter, AT8631 joining plate
17 detailsOther
Operating Frequencies
Band DE2: 470.125 to 529.975 MHz
Moderation Mode
FM
Pin2
Inst Input
Image Rejection
60dB nominal
Pin3
Mic Input
Spurious Emissions
Following federal and national regulations
Pin4
BIAS +5V
30mw
9 hours
Operation Temperature Range
23°F to 113°F (Battery performance may be reduced at very low temperatures)
Operating Range
100m (300'), typical (Open range environment with no interfering signals)
Band Ee1
530.000 to 589.975 MHz
Bias
12VDC, 160mA total
Total Harmonic Distortion
< 1% (at 1kHz, 17.5kHz deviation)
Receiving System
True diversity
10mw
9.5 hours
Batteries
Two 1.5V AA, not included
Dynamic Range
115dB (A-weighted), typ.

Complete your setup

Worth comparing

More from Audio-Technica