Detail 01
1/4-inch TRS male to XLR male
The two ends are different, so confirm the required connector at each point in the signal path.
Product detailSKU #1500000474733
AsteropePro Studio TRS to XLR Speaker Cable - 6 ft.
Independent shopping perspective
The Korena take
For a short TRS-to-XLR connection in a professional signal chain, the 6-foot Pro Studio Series cable pairs a 1/4-inch TRS male connector with an XLR male termination. Directional twin-axial 20 AWG copper conductors, 21 pF/ft capacitance, and 98% cross-braided tin copper shielding support low-noise signal transfer with RFI and EMI rejection. The red pressurized PVC jacket, barbed-collar strain relief, gold-plated connectors, and silver solder address repeated professional handling.
Strong match
Who this is for
- Short studio or live signal runs requiring a 1/4-inch TRS male connection at one end and XLR male at the other.
Consider the trade-offs
When to look elsewhere
- Connections that do not use a 1/4-inch TRS male connector and an XLR male connector.
- Runs requiring more than 6 feet of cable.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
21 pF/ft capacitance
This is the cable's specified capacitance per foot.
Detail 03
98% cross-braided tin copper shield
Provides the stated RFI and EMI rejection.
Detail 04
Barbed-collar strain relief
Adds strain relief at the connector area.
Final check
Know before you order
- 01Check both ends of the connection: one requires 1/4-inch TRS male and the other XLR male.
- 02Confirm the 6-foot length suits the intended run.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What are the connectors?
It has a 1/4-inch TRS male connector on one end and an XLR male connector on the other.
02Does it reject interference?
Yes. The cable is specified for RFI and EMI rejection and uses 98% cross-braided tin copper shielding.
03Is it directional?
Yes, it has a directional twin-axial design.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Red
- Conductor Material
- 99.99% pure copper
4 detailsConnections & power
- Connector 2
- XLR male
- Connector 1
- 1/4 inch TRS male
- Jacket Material
- Pressurized PVC
- Connector Plating
- Gold-plated
1 detailsSize & weight
- Available Lengths
- 6', 10', 15', 20'
11 detailsOther
- Conductor Gauge
- 20 AWG
- Capacitance
- 21 pF/ft
- Shielding Coverage
- 98% cross-braided tin copper
- Cable Design
- Twin-axial
- Strain Relief
- Barbed collar
- Solder
- High-purity silver
- Rfi and Emi Rejection
- Yes
- Product Type
- TRS male to XLR male cable
- Directional
- Yes
- Series
- Pro Studio Series
- Dielectric
- Polypropylene
