Detail 01
20 AWG 99.99% pure copper conductors
The cable uses 20 AWG conductors specified as 99.99% pure copper.
Product detailSKU #1500000474739
AsteropePro Studio TRS to XLR Speaker Cable - 20 ft.
Independent shopping perspective
The Korena take
For a longer 20-foot TRS-to-XLR connection, the Pro Studio cable combines directional twin-axial construction with 20 AWG conductors made from 99.99% pure copper. The listed 21 pF/ft capacitance and 98% cross-braided tin-copper shield support a low-noise signal path with RFI and EMI rejection. A pressurized PVC jacket, barbed-collar strain relief, gold-plated connectors, and high-purity silver solder round out a cable intended for repeated professional routing.
Strong match
Who this is for
- A 20-foot TRS-to-XLR connection where extra reach and specified RFI/EMI rejection are needed.
Consider the trade-offs
When to look elsewhere
- Connections that require connector types other than 1/4-inch TRS male and XLR male.
- Setups where a 20-foot run is too long or too short.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Directional twin-axial design
It is a directional cable with twin-axial construction.
Detail 03
Pressurized PVC jacket
The red outer jacket is made from pressurized PVC.
Final check
Know before you order
- 01Check that your routing calls for 20 feet.
- 02Verify the required connector ends: 1/4-inch TRS male and XLR male.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long is this version?
20 feet.
02Does it provide RFI and EMI rejection?
Yes. RFI and EMI rejection is listed, with 98% cross-braided tin-copper shielding.
03Are the connectors gold-plated?
Yes.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Red
- Conductor Material
- 99.99% pure copper
4 detailsConnections & power
- Connector 2
- XLR male
- Connector 1
- 1/4 inch TRS male
- Jacket Material
- Pressurized PVC
- Connector Plating
- Gold-plated
1 detailsSize & weight
- Available Lengths
- 6', 10', 15', 20'
11 detailsOther
- Conductor Gauge
- 20 AWG
- Capacitance
- 21 pF/ft
- Shielding Coverage
- 98% cross-braided tin copper
- Cable Design
- Twin-axial
- Strain Relief
- Barbed collar
- Solder
- High-purity silver
- Rfi and Emi Rejection
- Yes
- Product Type
- TRS male to XLR male cable
- Directional
- Yes
- Series
- Pro Studio Series
- Dielectric
- Polypropylene
