Detail 01
Three active-filter presets with phantom power
Phantom-powered operation gives you three selectable response options from the switch on the microphone body.
Product detailSKU #1349880541114
AKGD12 VR Large-Diaphragm Cardioid Dynamic Kick Drum Mic
1/4
Independent shopping perspective
The Korena take
Purpose-built for kick-drum recording, the D12 VR combines a large-diaphragm cardioid dynamic design with a thin diaphragm intended to extend low-frequency performance. Used without phantom power, it passes the sound source without the active filters. Apply phantom power and use the body-mounted switch to select one of three filter presets for a different kick response; that mode also lowers output by 10 dB. It connects through a standard three-pin XLR output.
Strong match
Who this is for
- Kick-drum recording setups that need passive operation or selectable active filter responses.
- Quickly changing kick-mic response at the microphone with the three-position filter control.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Automatic 10 dB output reduction in active-filter mode
Engaging the phantom-powered filter mode also reduces the microphone’s output level by 10 dB.
Detail 03
17 Hz–17 kHz frequency range (±2 dB)
The published response range extends from 17 Hz to 17 kHz.
Detail 04
164 dB SPL maximum, 0.5% THD
The microphone is rated to 164 dB SPL at 0.5% THD.
Final check
Know before you order
- 01The active filter presets require phantom power.
- 02The microphone uses a three-pin male standard XLR connector.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the D12 VR be used without phantom power?
Yes. Without phantom power, it operates without the active-filter presets.
02What happens when phantom power is enabled?
Three active-filter presets become available from the microphone-body switch, and output is automatically reduced by 10 dB.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsSound
- Max SPL
- 164dB SPL (for 0,5 % THD)
- Polar Pattern
- Cardioid
- Impedance
- <200 ohms (at 1,000Hz)
- Recommended Load Impedance
- >1,000 ohms
- Frequency Range
- 17Hz–17kHz (±2dB)
- Sensitivity
- 1,2 mV/Pa ± -58dBV (at 1,000Hz passive)
1 detailsPlayability
- Neck Shape
- D
3 detailsBody & build
- Color
- Black
- Type
- Dynamic pressure gradient transducer
- Finish Front Grille
- Glossy galvanized nickel matte
1 detailsConnections & power
- Connector
- Three-pin male standard XLR
3 detailsSize & weight
- Weight
- 500
- Net Weight
- 500 g (1.1 lb.)
- Dimensions
- 125 mm x 101 mm x 66 mm (4.9 inch x 3.9 inch x 2.6 inch)
3 detailsOther
- Environment Temperature Range
- -10º C - +70º C
- Rear Grille
- Matte black paint
- Relative Humidity At 20 C
- 90%
