Detail 01
1,100W dynamic power
The system’s dynamic rating is divided between 500W for the subwoofer and 600W for the line-array speaker.
Product detailSKU #1500000403823
YamahaSTAGEPAS 1K mkII Stereo Portable PA Package With DXL1K Speaker System
1/9
Independent shopping perspective
The Korena take
This Yamaha package pairs the STAGEPAS 1K mkII with the compatible DXL1K speaker system for a linked stereo PA arrangement. Run one cable from the STAGEPAS 1K mkII to the DXL1K to connect the two systems. The STAGEPAS provides five mixing channels, Bluetooth audio, 1-knob EQ, MODE compression settings and DSP SPX digital reverb, so core adjustments stay on the system. Its 1,100W dynamic rating drives a 12-inch powered subwoofer and ten 1.5-inch line-array drivers, with 170° horizontal by 30° vertical coverage.
Strong match
Who this is for
- Performances needing a linked stereo setup using the STAGEPAS 1K mkII and compatible DXL1K.
- Small PA workflows that need onboard mixing, Bluetooth audio and straightforward sound adjustment.
- Applications needing wide 170° horizontal coverage from a line-array and powered-subwoofer system.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Five mixing channels
Provides three mono channels plus one stereo channel.
Detail 03
170° × 30° coverage
States the system’s horizontal and vertical coverage angles.
Detail 04
37 Hz–20 kHz frequency range at -10 dB
States the supplied frequency range.
Detail 05
1-knob EQ and MODE
The EQ can perform multiple EQ processes simultaneously, while MODE selects optimized compression settings such as Speech or Music.
Detail 06
50.71 lb. system weight
The supplied weight for the system.
Final check
Know before you order
- 01Stereo operation links the DXL1K to the STAGEPAS 1K mkII with a single cable.
- 02The STAGEPAS 1K mkII power requirement varies by region: 100V, 110–120V, or 220–240V AC as specified.
- 03A dedicated Yamaha DL-SP1K dolly and FC5 reverb footswitch are listed as options.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is included in this package?
It includes the Yamaha STAGEPAS 1K mkII and the compatible DXL1K speaker system.
02How is the DXL1K connected for stereo?
Run a single cable from the STAGEPAS 1K mkII to the DXL1K using the Link connection.
03Does the STAGEPAS system have Bluetooth?
Yes. It supports Bluetooth 5.0 with A2DP SBC and AAC.
04What accessories are supplied with the STAGEPAS 1K mkII?
The supplied accessories are a power cord and cover.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Crossover Frequency
- 240Hz
- Line Array Speaker
- 8 ohms
- Frequency Response 10db
- 37Hz–20kHz
- Frequency Range 10db
- 37Hz–20kHz
1 detailsPickups & controls
- Control and Others
- Reverb footswitch, STAGEPAS Controller (iOS/Android app)
1 detailsBody & build
- Type
- Powered subwoofer with a line array speaker
8 detailsConnections & power
- Outputs
- Link out x1, monitor out x1
- Powered Subwoofer
- Bass-reflex type, Line array speaker: Enclosed
- Inputs
- Mono x3 (mic/line) + stereo x1 (line)/mono x2 (line), link in x1
- Power Rating
- Dynamic,1,100W
- Power Requirements
- Depending on region: 100V 50Hz/60Hz, 110–120V 60Hz, 220V–240V 50Hz/60Hz
- Power Consumption
- 25W (Idle), 91W (1/8 power)
- Maximum Output Level Measured Peak Iec Noise 1 M
- 125dB SPL
- Maximum Output Level
- (1 m; on axis): 125dB SPL
3 detailsSize & weight
- System Dimensions Wxhxd
- 3.15 inch x 78.74 inch x 16.46 inch (maximum)
- Weight
- 50.71
- System Weight
- 50.71 lb.
24 detailsOther
- Coverage Angle Horizontal X Vertical
- 170° x 30°
- Crossover
- 240Hz
- Hi Z
- CH2/3, 1-knob EQ: CH1-3/ST
- 220v
- 50Hz
- 110 120v
- 60Hz,
- Options
- Yamaha DL-SP1K (dedicated dolly), FC5 (footswitch for reverb ON/OFF)
- Dynamic
- 1,100W (subwoofer: 500W, line array speaker: 600W)
- 220 240v
- 50/60Hz
- Mono Line
- 1
- 220 230v
- 60Hz
- Accessories
- Power cord x1, cover x1
- Handle
- Top of powered subwoofer x1
- Mixing Channels
- 5 (mono x3 + stereo x1)
- 100v
- 50/60Hz
- 110v 220v
- 60Hz
- Bluetooth
- Ver. 5.0, A2DP (SBC, AAC)
- Number of Mixing Channels
- 2
- Mono Mic Line
- 1
- Subwoofer
- 4 ohms
- Lf
- Powered subwoofer: 12 inch cone
- Amplifier Class
- D
- Hf
- Line array speaker: 1.5” cone x10
- Onboard Processors
- DSP SPX digital reverb (4 program, parameter control)
- Coverage Area Hxv
- 170º x 30º
