Detail 01
Output gain range: continuous from infinity to 65 dB
Provides continuous output-fader adjustment across that range.
Product detailSKU #1500000465695
Wolff AudioTutti 500 Series Microphone & Instrument Preamp
1/4
Independent shopping perspective
The Korena take
Tutti is a 500 Series microphone and instrument preamp built around custom dual Cinemag nickel I/O transformers and discrete dual 990 op-amps. Its front-panel inputs put microphone and instrument recording within easy reach, with more than 60 dB of clean gain for differing source levels. The continuous output fader adjusts from infinity to 65 dB. Silent phantom-power switching is useful during live patching, allowing it to be engaged without pops.
Strong match
Who this is for
- Recording microphone and instrument parts while needing front-panel access to both input types.
- Live patching situations where phantom power must change without creating audible pops.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Distortion: less than 0.03% at sub-100 Hz frequencies
Keeps the specified low-frequency distortion figure below 0.03%.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can it accept both microphones and instruments?
Yes. The front panel accepts microphone and instrument sources.
02How much clean gain is available?
It provides more than 60 dB of clean gain.
03Will switching phantom power create pops?
No. Its phantom-power selection switches without pops.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsConnections & power
- Output Gain Range
- Continuous from infinite to 65dB
- Phantom Power
- Yes, with no pops during switching
- Input Impedance TRS
- 100 kohms
- Input Impedance Microphone
- 150/1500 ohms
2 detailsSize & weight
- Weight
- 7
- Shipping Weight
- 7 lb.
1 detailsIn the box
- Clip Onset Level
- +28dBu
6 detailsOther
- Response Range
- Flat from 10Hz–60kHz
- Transformers
- Custom dual Cinemag nickel I/O transformers
- Current Draw
- Less than 100 milliamps per rail
- Phase Shift
- Minimal within usable response range
- Op Amps
- Discrete dual 990 op-amps
- Distortion Level
- Less than 0.03% at
