Detail 01
Selectable active/passive mode
Lets you choose between the two listed operating modes.
Product detailSKU #1500000482262
Warm AudioWA-DI-P2 Passive Stereo Direct Box
1/6
Independent shopping perspective
The Korena take
The WA-DI-P2 is a two-channel stereo direct box for routing instrument-level sources as balanced, mic-level outputs. Its selectable active/passive operation gives the unit two operating modes; active mode is powered by 48V phantom power. A custom-wound CineMag USA output transformer, variable -3 dB to -30 dB pad, and ground lift switch provide practical control over stereo signal routing. The rugged aluminum enclosure suits repeated use in stage and studio signal chains.
Strong match
Who this is for
- Routing a stereo keyboard, synthesizer, pedalboard, or other dual-channel source to balanced mic-level outputs.
- Stage or studio setups needing two independent direct-injection channels.
- Managing input level with the variable -3 dB to -30 dB pad.
Consider the trade-offs
When to look elsewhere
- Mono-only routing when two stereo channels are not needed.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
48V phantom power in active mode
Active operation requires 48V phantom power.
Detail 03
Ground lift switch
Provides a ground-lift control for the signal path.
Detail 04
600 ohm balanced mic-level output impedance
Its output is balanced and specified at mic level.
Final check
Know before you order
- 01Plan for 48V phantom power if you intend to use active mode.
- 02Check that the 5 x 5.5 x 2.88 inch enclosure fits your routing space.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the WA-DI-P2 a stereo DI?
Yes. It has two channels and is specified as stereo.
02Can it operate actively?
Yes. It has an active/passive switch, and active mode uses 48V phantom power.
03What does the pad range cover?
The variable pad attenuates from -3 dB to -30 dB.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 10Hz–100kHz ±0.5dB
1 detailsPickups & controls
- Circuit
- Class-A components with gold-plated traces
1 detailsBody & build
- Type
- Passive stereo (active/passive selectable)
3 detailsConnections & power
- Input Impedance
- 1 Mohm
- Output Impedance
- 600 ohm (balanced, mic level)
- Power Supply
- 48V phantom power (active mode)
1 detailsSize & weight
- Dimensions
- 5 inch x 5.5 inch x 2.88 inch
10 detailsOther
- Housing
- Rugged aluminum
- Transformer
- Custom-wound CineMag USA output transformer
- Mode
- Active/passive switch
- Pad
- Variable -3dB to -30dB
- Product Type
- Direct box
- Channels
- Stereo
- Thd Passive
- 0.01% (20Hz–50Hz), <0.004% (50Hz–20kHz)
- Model
- WA-DI-P2
- Thd Active
- 0.01% (20Hz–50Hz), <0.003% (50Hz–20kHz)
- Conversion
- Instrument level to mic level
